Pioneer DEH-P7400HD Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Receiver Pioneer DEH-P7400HD. Pioneer DEH-P7400HD 39 pages. Cd rds receiver

Print Page

Section

Operating this unit

Loudness (loudness)

Loudness compensates for deficiencies in the low-

frequency and high-frequency ranges at low vol-

ume.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn loudness on or off.

3 Turn M.C. to select the desired setting.

Low (low)—Mid (mid)—High (high)

Subwoofer1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output

which can be turned on or off.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn subwoofer output on or off.

3 Turn M.C. to select the phase for the sub-

woofer output.

Turn M.C. to the left to select reverse phase,

and Reverse appears in the display. Turn M.C.

to the right to select normal phase, and Nor-

mal appears in the display.

Subwoofer2 (subwoofer adjustment)

The cut-off frequency and output level can be ad-

justed when the subwoofer output is on.

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the cut-off fre-

quency and the output level for the subwoofer.

3 Turn M.C. to select the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

4 Turn M.C. to adjust the output level for the sub-

woofer.

The subwoofer level increases or decreases

each time you turn M.C. +6 to –24 is displayed

as the level is increased or decreased.

Bass Booster (bass boost)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

HPF (high pass filter adjustment)

When you do not want low sounds from the sub-

woofer output frequency range to play from the

front or rear speakers, turn on the HPF (high pass

filter). Only frequencies higher than those in the

selected range are output from the front or rear

speakers.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn high pass filter on or off.

3 Turn M.C. to select the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the

volume level of each source to prevent radical

changes in volume when switching between sour-

ces.

! When selecting FM as the source, you cannot

switch to SLA.

! Settings are based on the FM volume level,

which remains unchanged.

! The AM volume level can also be adjusted with

this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

Using Bluetooth wireless

technology

! Only for DEH-P8400BH

Using Bluetooth telephone

Important

! Since this unit is on standby to connect with

your cellular phone via Bluetooth wireless

technology, using it without the engine run-

ning can drain the battery power.

! Operations may vary depending on the kind

of cellular phone.

Operating this unit

! Advanced operations that require attention

such as dialing numbers on the monitor,

using the phone book, etc., are prohibited

while driving. Park your vehicle in a safe

place when using these advanced opera-

tions.

Setting up for hands-free phoning

Before you can use the hands-free phoning

function you must set up the unit for use with

your cellular phone.

1 Connection

Operate the Bluetooth telephone connection

menu. Refer to Connection menu operation on

this page.

2 Function settings

Operate the Bluetooth telephone function

menu. Refer to Phone menu operation on page

14.

Basic operations

Making a phone call

! Refer to Phone menu operation on page 14.

Answering an incoming call

1 When a call is received, press M.C.

Ending a call

1 Press PHONE.

Rejecting an incoming call

1 When a call is received, press PHONE.

Answering a call waiting

1 When a call is received, press M.C.

Switching between callers on hold

1 Press M.C.

Canceling call waiting

1 Press PHONE.

Adjusting the other party's listening volume

1 Turn LEVER while talking on the phone.

! When private mode is on, this function is not

available.

Turning private mode on or off

1 Press BAND/

while talking on the phone.

Switching the information display

1 Press

/DISP while talking on the phone.

Notes

! If private mode is selected on the cellular

phone, hands-free phoning may not be avail-

able.

! The estimated call time appears in the dis-

play (this may differ slightly from the actual

call time).

Connection menu operation

Important

! Be sure to park your vehicle in a safe place

and apply the parking brake when perform-

ing this operation.

! Connected devices may not operate properly

if more than one Bluetooth device is con-

nected at a time (e.g. a phone and a separate

audio player are connected simultaneously).

Press and hold PHONE to display the con-

nection menu.

# You cannot operate this step during a call.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.