Pioneer SX-303/KC Service Manual - Page 15

Browse online or download pdf Service Manual for Receiver Pioneer SX-303/KC. Pioneer SX-303/KC 21 pages. Am/fm stereo receiver
Also for Pioneer SX-303/KC: Service Manual (28 pages)

Print Page

Pes Te

Syn

reer

11. DIAL CORD

STRINGING

. Remove the bonnet.

. Remove the tuning drum from the shaft of the

tuning capacitor.

. Tie one end of the cord to the stud A located

inside the tuning drum.

. Rotate the tuning capacitor right around until

the rotor blades are fully intermeshed.

. Secure the tuning drum back onto the tuning

capacitor shaft, making sure that the securing

screw B faces directly upward.

. Pass the cord out through the small opening in

the

circumference

of the

tuning drum

(see

diagram), and then take it over pulleys C and D

in that sequence.

. Wind the cord around the tuning shaft 3 times.

. Pass it over pulley E, wind it around the tuning

drum

1 time,

and finally tie it to the spring

hook F so that it is tensioned.

cQ-

Tuning drum

10.

11.

12.

13.

14,

. Turn the tuning shaft, and check that the cord

moves smoothly.

Cut off any excess cord.

Turn

the

tuning

shaft

counter-clockwise

as far as it will go.

Align the dial pointer with the starting point

of the dial scale, and then pass the cord over

it.

Check that the dial pointer is in line with the

starting point of the dial scale.

Finally

apply

the locking paint to the cord

securing positions (stud A and spring hook F)

and the dial pointer connection.

Starting point

Pf] AM

acian

EES

Dial pointer