Pioneer VSX-519V-K Operating Instructions Manual - Page 31
Browse online or download pdf Operating Instructions Manual for Receiver Pioneer VSX-519V-K. Pioneer VSX-519V-K 46 pages. Audio/video multi-channel receiver
Also for Pioneer VSX-519V-K: Catalog (8 pages), Specification Sheet (2 pages)
Print Page
Listening to your system
Setting
What it does
c
Specifies how dual mono encoded Dolby Digital
DUAL MONO
soundtracks should be played.
DRC
Adjusts the level of dynamic range for movie soundtracks
optimized for Dolby Digital and DTS (you may need to use
(Dynamic Range
this feature when listening to surround sound at low
Control)
volumes).
LFE ATT
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
(LFE Attenuate)
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –10 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.
Specifies the routing of the HDMI audio signal out of this
HDMI
receiver (amp) or through to a TV or flat screen TV. When
(HDMI Audio)
THRU is selected, no sound is output from this receiver.
A.DLY
This feature automatically corrects the audio-to-video delay
between components connected with an HDMI cable. The
(Auto Delay)
audio delay time is set depending on the operational status
of the display connected with an HDMI cable. The video
delay time is automatically adjusted according to the audio
delay time.
e
Spreads the center channel between the front right and left
C.WIDTH
speakers, making it sound wider (higher settings) or
(Center Width)
narrower (lower settings).
(Applicable only when
using a center speaker)
e
Adjusts the surround sound balance from front to back,
DIMEN.
making the sound more distant (minus settings), or more
(Dimension)
forward (positive settings).
e
Extends the front stereo image to include surround
PNRM.
speakers for a 'wraparound' effect.
(Panorama)
a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.
b. You can change the Sound Retriever feature at any time by using S.RETRIEVER button.
c. This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
d. This feature is only available when the connected display supports the automatic audio/video synchronizing
capability ('lip-sync') for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and
adjust the delay time manually. For more details about the lip-sync feature of your display, contact the
manufacturer directly.
e. Only available with 2-channel sources in DOLBY PLII MUSIC mode.
d
Option(s)
CH1 –
Channel 1 is heard only
CH2 –
Channel 2 is heard only
CH1 CH2 –
Both channels heard
from front speakers
OFF
MAX
MID
LFEATT 0 (0 dB)
LFEATT 10 (–10 dB)/
LFEATT ** (OFF)
AMP
THRU
OFF
ON
0 to 7
Default: 3
–3 to +3
Default: 0
OFF
ON
05
31
En