Pioneer X-CM31-W Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Receiver Pioneer X-CM31-W. Pioneer X-CM31-W 36 pages. Cd receiver system
Print Page
Getting started
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
JAZZ
ROCK
POP
P.bass control
When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.
Bass/treble control
Press the BASS/TREBLE, then press / to adjust the bass
or treble.
Note
EQUALIZER, P.BASS and BASS/TREBLE, the simultaneous
operation is not possible. Among the features of these three,
one feature will only work you have selected.
If you select one of three functions, features
that are not selected will be set as follows.
1
If you change the settings of P.BASS (ON/
OFF).
• EQUALIZER : FLAT
• BASS/TREBLE : BASS=0, TREBLE=0
2
If you change the settings of EQUALIZER.
• P.BASS : OFF
• BASS/TREBLE : BASS=0, TREBLE=0
3
If you change the settings of BASS/TREBLE.
• P.BASS : OFF
• EQUALIZER : FLAT
Equalizer off.
For jazz.
For rock.
For pop music.
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
Press STANDBY/ON to turn the power on.
1
2
Press and hold CLOCK/TIMER.
Press / to select "ONCE" or "DAILY",
3
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
Press / to select "TIMER SET", then
4
press ENTER.
Press / to select the timer playback
5
source, then press ENTER.
• CD, DAB, FM, USB/IPOD, IPOD, AUDIO IN and LINE
can be selected as the playback source.
Press / to select the timer day, then
6
press ENTER.
Press / to set the hour, then press
7
ENTER.
Press / to set the minute, then press
8
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume press VOLUME +/- , then
press ENTER.
10 Press STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
04
13
En