Pioneer X-HM71-K Operating Instructions Manual - Page 27
Browse online or download pdf Operating Instructions Manual for Receiver Pioneer X-HM71-K. Pioneer X-HM71-K 42 pages. Network cd receiver system
Also for Pioneer X-HM71-K: Quick Start Manual (33 pages)
Print Page
8
8
Note
•
You can set the network as in the above by connecting this
unit's IP address via the Safari Browser even if Web Control
isn't selected.
Connection settings using an iOS device
You can apply iPod/iPhone/iPad (iOS device with iOS ver 5.0
or later)'s Wi-Fi settings to this receiver.
1
Be sure the LAN cable is not connected to the receiver.
2
Unlock your iPod/iPhone/iPad that Wi-Fi connection is
completed.
3
Plug the power cord into an AC outlet. Press STANDBY/
ON.
4
Press iPod or USB on the remote control.
If you press iPod, connect iPod/iPhone to the docking
station. If you press USB, connect the iOS device to the
USB/iPod/iPhone/iPad terminal.
5
Press SETUP.
6
Select Network Setting Network Configuration
Wireless iOS Device and then press ENTER.
7
Tap Allow on iPod/iPhone/iPad.
The Wi-Fi settings of your iPod/iPhone/iPad are applied to
the receiver.
Share Wi-Fi Settings?
Friendly Name
1
Press NETWORK SETUP.
2
Select Network Setting Friendly Name.
3
Use /// to enter Friendly Name, then press
ENTER.
/: Moves the adjusting digit.
/: Changes displayed character.
REPEAT: Switches character types.
CLEAR: Deletes one characters at a time.
Parental lock setup
Restrict internet radio access for children. When Parental
Lock is set to On, you cannot listen to Internet Radio and
select Favorites without entering a password.
Turn on/off the parental lock
1
Press NETWORK SETUP.
The Initial Setup screen is displayed on the display.
2
Select Network Setting Parental Lock.
3
Use /// or numeric buttons to enter the
password, then press ENTER.
/: Moves the adjusting digit.
/: Increases or decreases numbers.
The factory default setting is "0000".
4
Select Parental Lock.
Ignore
5
Use / to select On or Off, then press ENTER.
Parental Lock
Change Password
Parental Lock
Changing the password
1
Press NETWORK SETUP.
The Initial Setup screen is displayed on the display.
2
Select Network Setting Parental Lock.
3
Use /// or numeric buttons to enter the current
password, then press ENTER.
4
Select Change Password.
Parental Lock
Change Password
Parental Lock
5
Use /// or numeric buttons to enter the new
password, then press ENTER.
If you press RETURN, the previous screen will be
displayed.
Internet radio
27