Pioneer XV-HTD510 Operating Instructions Manual - Page 23

Browse online or download pdf Operating Instructions Manual for Receiver Pioneer XV-HTD510. Pioneer XV-HTD510 48 pages. Dvd receiver/speaker system
Also for Pioneer XV-HTD510: Operating Instructions Manual (48 pages)

Print Page

1. Remote Control

The simplest way to shape the sound is by adjusting the

amount of bass and treble.

• The bass and treble controls have no effect when

using the DSP modes, or when the surround mode is set

to anything other than

(surround off).

• You cannot adjust the bass or treble when Record

mode is active (see Direct recording on page 25).

∞

You can see the current level in the display.

In addition to the standard controls for adjusting bass

and treble, this system has a P.Bass feature. Switch this

on to further extend the bass.

• P.Bass has no effect when listening through

headphones.

•

You cannot adjust P.Bass when Record mode is

active (see Direct recording on page 25).

∞

The sound modes allow you to add various surround

and room-type sound effects to your DVDs, CDs and

other sources. These effects process the sound in various

ways to simulate different spaces such as a theater, or

concert hall.

For Dolby Surround, Dolby Digital or DTS surround

sources, such as DVDs, use the Advanced Theater effects

to add room ambience to the sound; for stereo-only

sources, such as audio CDs, use the DSP modes.

For each effect you can also adjust how strong the effect

sounds. Often, a more subtle effect level enhances the

sound better than turning it right up. Experiment to see

what works best for you.

When you play DVD discs with Dolby Digital or DTS

sound, choose from the following sound settings.

•

– For digital sources, decoding is automati-

cally selected according to the source: Dolby Digital,

DTS, Dolby Pro Logic, 2-channel stereo, etc. No extra

effects are added to the source. Analog sources are

played in the same way as the Surround Off setting.

•

– As Auto, except that 2-channel

(analog or digital) sources are processed using Dolby

Pro Logic for surround-sound effects.

The following six settings are Advanced Theater effects.

•

– Concert hall sound.

•

– Classic, mid-size movie theater sound.

•

– Large, modern movie theater sound.

•

Virtual surround sound from just the main front stereo

speakers and a subwoofer. Use this mode if you can't use

the surround speakers.

•

Virtual surround sound if you have connected the

surround speakers, but are using them in front of the

listening position.

•

– Widens the rear channel

soundstage.

–