Dinam Led Dn-T2M Manual - Page 2

Browse online or download pdf Manual for Temperature Controller Dinam Led Dn-T2M. Dinam Led Dn-T2M 3 pages. 2.4g led color temperature controller

Print Page

Touch Color Circle

Speed+/Speed-

CT+/CT-

Scene-saved Keys

(Press for 3 seconds, can save the

scene mode in the 8 current

zone control)

M1 M2

Zoning Instructions:

Select one of the zone: Press keys 1-8 on the remote control.

●

Select zone control arbitrarily: press"

+any number+ ",

eg: take 456 as a zone, should press " 456 ".

●

All choose(8 zones): press "

" twice.

when a zone is under inactive state, press "Zone selection keys"

●

to light up that zone.

★Press "Zone Selection Keys"

in 3 seconds, the buzzer can be on or off.

5. Other Special Functions

A. Reset Function:

Feature: Reset function is available when remote operates abnormally.

Operation:

Long press

simultaneously, release the 2 keys after 3 seconds, the remote will auto off,

means reset completed. and then could restart the remote.

B. Check and Edit the Frequency Point on the Remote:

Feature:

Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.

Multiple remotes sync-control becomes available when they use the same frequency point.

Attn:

After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.

Check the Frequency Point on the Remote:

Turn on the remote, long press the on/off key

green light

flashes, the numbers of the green flash will be the frequency point of the remote. you can only edit the

frequency point after 3 seconds.

Edit the Frequency Point on the Remote: In frequency changing state

Method 1: short press any key from 1-8 and

the green light will flash in the same numbers. Press again any key or touch the color circle to exit the

frequency edit state.

Method 2: long press "on/off" key

over 5 seconds, the green light

frequency point accumulate 1. In short, long press the "on/off" key

point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.

Sync Status Indicator Light

BRT+/BRT-

(Keep pressing to adjust

brightness continuously)

Zone Selection Keys

On/Off

for 5 seconds until the green light

flashes 3 times, and then the

key, the frequency point will be 1-9 correspondingly( represent 9),

flashes, the flash times plus 1 means the

5 seconds each time, the frequency

6. System Diagram:

The receivers can be divided into 1~8 zones within effective distance(1pc receiver per zone), no wiring needed

between the receivers.

If you don't need color temperature smooth mode by pressing the

receivers and achieve brightness, color temperature adjustment synchronously.

OUTPUT

Receiver

Centralized zone-division

zone 1

OUTPUT

Receiver

, each zone can set up unlimited

zone 1

OUTPUT

Spacing zone-division

Receiver