Pioneer VSX-604S Operating Instructions Manual - Page 22

Browse online or download pdf Operating Instructions Manual for Stereo Receiver Pioneer VSX-604S. Pioneer VSX-604S 34 pages.

Print Page

REMOTE CONTROL OPERATION

RECEIVER CONTROL BUTTONS

@ RECEIVER POWER button

Switches the receiver power between ON and STANDBY.

@) ENTER button

When GUI is ON, press to execute an operation selected

with the Select/Adjust buttons.

@) VOLUME + , — buttons

Adjusts the overall volume.

REMOTE CONTROLLING OF ANY OTHER

OF YOUR AUDIO-VISUAL COMPONENTS

VIA THIS UNIT REQUIRES:

Allcomponents must be remote controllable (have a sensor

window on the front panel) to receive a direct command

from this unit, upon successful

learning of those

commands by this programmable unit.

I S C Intelligent

System Control

@ ONE TOUCH OPERATION buttons

VCR,CD,LD:

Pressing these buttons automatically calls up "ONE TOUCH

OPERATION SET UP" settings, made using GUI. (P.31)

TUNER:

This switches power to the TUNER

ON, and starts

reception of the last memorized station.

Also, if power to this unit is OFF, it is switched ON, and

operation automatically switches to the selected function.

When you press any of the ONE TOUCH

OPERATION

buttons, the GUI MODE becomes off.

@® FUNC. (function) button

Press to select the receiver input.

[een

uve ns POND

— > TUNER

VIDEO +-

CD+—LD

button

Switches TAPE 2 MONITOR on/off.

@G.U.I. button

Switches GUI MODE on and off.

When the GU! mode is ON, the Select/Adjust button ©

(A,>,V,<) lights.

M.CHECK (Mode check) button

Indicates whether the GUI MODE is on or off.

When it is on, 4, &, V, <Jlight. When it is off,

a@ONE TOUCH

OPERATION button lights to indicate the current function.

If you press the button again while it is lit, remote control

functions change. When the remote control is in the GU!

mode, the @Select/Adjust buttons(A, >, VY, <1) light.

@ Select/Adjust buttons(A, >, V, <1)

When the GUI mode is ON, A,>,V, and <1 light.

When using the GUI function with the on-screen display, use for

such operations as selection and adjustments (by moving the

cursor).

When the GUI mode is OFF, use to operate other components.

MUTE button

Used to temporarily mute the sound. When

it's in the on

position, the "MUTING" indicator lights. The volume is restored

when pressed again.

OPERATING OTHER COMPONENTS

A TE

SOP

When operating components other than the receiver:

1. Press the ONE TOUCH

OPERATION

button for the

component you want to operate.

2. Press the operation button.

NOTE:

Components that could not originally be operated by remote control

cannot be controlled by this unit's remote control.