Pioneer VSX-605S Operating Instructions Manual - Page 15
Browse online or download pdf Operating Instructions Manual for Stereo Receiver Pioneer VSX-605S. Pioneer VSX-605S 37 pages. Audio/video stereo receiver
Also for Pioneer VSX-605S: Operating Instructions Manual (37 pages)
Print Page
FRONT PANEL FACILITIES
6) SFC MODE button *
Each time you press it, the mode
and the display indications
change as follows.
prs:
SIMULATED SURROUND
off «
ARENA
+
DOLBY PRO LOGIC button *
Switches DOLBY PRO LOGIC SURROUND on and off.
(8) SUPER BASS button *
Press this button when you want to boost the bass.
DOLBY 3CH LOGIC button *
Select this setting when stereo-source regeneration and rear
speakers are not connected and you wish to use the front L, front
R, and center speakers to enjoy audio/visual material bearing
the DCGsiaaRCER] mark.
(0 MASTER VOLUME control
Use it to simultaneously adjust the sound volume from the front,
center, and rear speakers.
4) VIDEO INPUT selector button
Press when performing playback on a VCR connected to VIDEO
INPUT jacks on the front panel.
42) RESET button
Use this when
norma!
operation
is not possible because
of
external influences such as static electricity or lightning, or when
operations are not functioning even when operation buttons are
pressed. Press this button to return to normal operating
conditions.
(3 PHONES jack
Connect the plug on your headphones to this jack, Set SPEAKERS
A and 8 switches to OFF if you want to cut the sound from the
speakers and listen to it only through the headphones.
(4 VIDEO INPUT jacks
VIDEO components such as a VCR or TV camera, etc. can be
connected,
45 Display section
See page 16.
46 Tuner operation buttons
FM/AM button:
Use this to switch between FM and AM frequency band reception.
MPX MODE button:
Use to select the auto stereo mode or monaural mode when
listening to FM broadcasts. The monaural
mode has been
selected when the MONO
indicator in the display section is lit
Auto stereo mode
Normally, leave in this mode for reception. When a stereo FM
broadcast
is received,
it will be automatically
reproduced
in
stereo,
Monaural mode
When receiving distant stations or stations with weak broadcast
signals, the input signal may be weak, thus resulting in increased
noise during FM stereo broadcasts. In this event, setting the
receiver to the monaural mode will reduce the noise. in this case,
however, FM stereo broadcasts will be reproduced in monaural
sound.
NOTE:
This button has no effect on reception of AM broadcasts.
a7) SELECT button
Press this button to switch to the station mode. Then you can
turn the Multi-jog to select a station.
When
in the Frequency
mode, tuning the Multi-jog raises or
jowers the frequency.
Serves as a button for forwarding to the left digit (<4) when
inputting CD titles, (See page 27.)
48 GUI MODE button
Switches GUI MODE en and off.
9 Multi-jog
Use during tuner operation to select frequencies and station
numbers.
During GUI operation,
use to move the on-screen
cursor,
Serves as a jog for selecting characters when inputting CD titles,
(See page 27.)
20 ENTER button
Press this button when you are in the frequency preset mode,
and the displayed frequency is memorized in the selected station.
(Station indications stop flashing and stay lit.)
When
GU! is ON, press to execute an operation selected with
the multi-jog 19.
Use this button when you input a tite of CD as well, (See page
27.)
2: MEMORY button
Press this button to switch to the frequency preset mode.
{When GUI is ON, it does not operate.)
Serves as a button for forwarding to the right digit () when
inputting CD titles. (See page 27.)
22 BASS control
Use to adjust the low-frequency level. Turn clockwise to boost
bass, and counterclockwise to attenuate bass,
23 TREBLE control
Use to adjust the high-frequency level. Turn clockwise to boost
treble, and counterclockwise to attenuate treble.
2 BALANCE control
Use to adjust the sound volume balance between left and right
speakers.
L
:Decreases the sound on the right side.
R_
:Decreases the sound on the left side.
Usually, left and right volume jevels should be the same.
* Setting is memorized
separately for each input selector
button.
16
<ARB7O59>