Pioneer A-07 Service Manual - Page 20

Browse online or download pdf Service Manual for Amplifier Pioneer A-07. Pioneer A-07 20 pages.

Print Page

6. PANEL FACILITIES

FRONT PANEL

1: Remote control sensor window

2: POWER STANDBY/ON OFF switch

OFF

: When set to the OFF position, the main power

flow is cut and the unit is no longer fully

operational.

STANOBY/ON : When set to the STANDBY/ON position, power is

supplied and the unit becomes operational. The

unit can be switched between STANDBY and ON

via remote control unit.

3 STANDBY indicator

Lights to indicate standby; goes out when POWER switch of the

remote control unit is pushed.

When in STANDBY, power to the audio circuitry is cut. The

control circuit however remains powered, so that the remote

control operation is still possible.

4:GAIN SELECTOR

This enables 2-step power amp gain switching between 26 dB

and 40 dB. 26 dB is the usual setting for audio reproduction with

high S/N ratio. Switch to 40 dB if volume level is insufficient.

NOTE:

if you switch from 26 dB to 40 dB during operation, volume level

suddenly becomes very high. When switching from 26 dB to 40 dB,

be careful the volume level setting isn't too high.

5. VOLUME knob

Adjusts volume

level.

6: Power indicator

This stays in orange for 6 seconds after switching ON and then

turns red. The sound is muted while in orange.

'7, INPUT SELECTOR

Use this to select between TAPE 2/CDR, TAPE

1/DAT, CD,

PHONO,

TUNER,

and LINE, depending on which component

you want to listen to. Because input switching is by relay, there's

no sound for about 1 second after switching.

8 REC OUT switch

Switch this ON, and the source selected with the input selector

is output through the REC OUT jacks. However, if you select

TAPE 1/DAT there is no output from the TAPE 1/REC jacks, and

if you select TAPE 2/COR there is no output from the TAPE 2/REC

jacks.

1 SPEAKERS terminals (right channel)

2 LINE jack (right)

3 TUNER jack (right)

4 CD jack (right)

5 TAPE 1 PLAY/REC jacks (right)

6 TAPE 2 PLAY/REC jacks (right)

7: PHONO jack (right)

8 PHONO jack (left)

9 TAPE 2 PLAY/REC jacks (left)

10. TAPE 1 PLAY/REC jacks (left)

11.CD jack (left)

12 TUNER jack (left)

13 LINE jack (left)

14 SPEAKERS terminals (left channel)

15; Power cord

Connect this cord to an AC wail socket.

16 GND (Turntable ground terminal)

A-07