Pioneer A-445 Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer A-445. Pioneer A-445 37 pages.
Also for Pioneer A-445: Operating Instructions Manual (13 pages)
Print Page
PANEL FACILITIES
See page 2 for Panel Facilities.
[FRONT PANEL]
@ POWER switch/indicator
Press to turn power to the unit ON and OFF.
When the power is ON, the indicator lights.
@® SPEAKERS A selector switch
Use this switch to listen to the speaker systems connected to the
SPEAKERS A terminals.
ON (2):
Depressed position: Sound is heard from the speaker systems.
OFF (m):
Released position: No sound is heard from the speaker systems.
Set to this position when listening with headphones.
@ SPEAKERS B selector switch
Use this switch to listen to the speaker systems connected to the
SPEAKERS B terminals.
ON (=):
Depressed position: Sound is heard from the speaker systems.
OFF (m):
Released position: No sound is heard from the speaker systems.
Set to this position when listening with headphones.
@ REC SELECTOR switch
When this switch is set to a position other than SOURCE or OFF,
the equipment selected by the REC SELECTOR
switch can be
recorded
from,
irrespective
of the
settings
of the
INPUT
SELECTOR and DIRECT switches.
TUNER:
To record from the equipment connected to TUNER terminals.
CD:
To record from the equipment connected to CD terminals.
OFF:
In this position, nothing from the REC terminals of DAT/TAPE 1
and TAPE 2 is output. Set to this position when not recording; the
tape deck will be disconnected, improving sound quality.
SOURCE:
To record from the equipment selected by the INPUT SELECTOR
switch.
TAPE:
12
To record (copy) from the tape deck of DAT/TAPE 1 terminals, to
the tape deck of TAPE 2 terminais.
21
To record (copy) from the tape deck of TAPE 2 terminals, to the
tape deck of DAT/TAPE 1 terminals.
© INPUT SELECTOR switch
Use to select the playback source.
LINE:
For playback with a component connected to the LINE terminals.
TUNER:
For AM or FM broadcast reception with a tuner.
PHONO:
For record playback with a turntable.
CD:
For compact disc playback with a CD player.
DAT/TAPE 1:
For playback with a tape deck or digital audio tape deck connected
to the DAT/TAPE 1 terminals.
TAPE 2:
For playback with a tape deck connected to the TAPE 2 terminals.
© VOLUME CONTROL
Use to adjust the volume level.
NOTE:
This unit is equipped with a circuit that attenuates the LOUDNESS
and TONE effect as volume is turned up.
@ PHONO SELECTOR switch (A-445 only)
Set in accordance
with the type of cartridge used
with your
turntable.
MM (m):
Set to this position when using a moving magnet cartridge, or a
moving coil cartridge with a high output of 1 mV or more.
MC (=):
Set to this position when using a moving coil cartridge.
MUTING switch (A-445 only)
Use to temporarily cut sound volume.
ON (=):
The sound is cut off.
OFF (m):
The sound will return to its previous volume.
© DIRECT switch/indicator
Use this switch/indicator when you do not wish to pass the output
from
input terminal equipment
through
the various frequency
adjusting
circuits
(SUBSONIC,
BASS,
TREBLE,
BALANCE,
LOUDNESS) and adaptor terminals (ADAPTOR).
ON:
The indicator lights: The signals input through the input terminals
are reproduced
without passing through the various frequency
adjusting circuits. This results in flat, pure sound which is a more
faithful reproduction of the input source.
OFF:
The indicator goes out: The signal passes through the various
frequency adjusting circuits.
5
<ARE1112>
E