Pioneer A-605R-G Service Manual - Page 22
Browse online or download pdf Service Manual for Amplifier Pioneer A-605R-G. Pioneer A-605R-G 25 pages.
Also for Pioneer A-605R-G: Service Manual (26 pages)
Print Page
FRONT L ASSEMBLY
AWZ7938 and AWZ8397 have the same construction except for the following:
=a
VR751, VR752 (30kQ — B5X2)
9. PANEL FACILITIES
(FRONT PANEL)
The illustration shows mode A-605R.
The illustration shows the hinged panel open.
Model A-405R is not equipped with @.
pen
atifeo amourea
A-6O5R
meals
alen
{2
—
ae)
A SPEAKERS B
f
o®
O08 ®
LOUDNESS
@ POWER STANDBY/ON switch/indicator
This is the switch for electric power.
ON
: When set to the ON position, power is supplied
and the unit becomes operational.
STANDBY
:When
set to the STANDBY
position, the main
power flow is cut and the unit is no longer fully
operational. A minute fiow of power feeds the unit
to maintain operation readiness.
When the STANDBY indicator lights, the unit is in
STANDBY.
NOTE:
When performing timer recording with this unit, be sure to set
the POWER STANDBY/ON switch to ON.
® Remote control sensor window
@ VOLUME control
Use to adjust the volume level.
NOTE:
The TONE effect functions regardless of volume levels.
32
ACS7017
©
-
ACS7016
® INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the indica-
tor lights for your desired input source. Turning the knob clock-
wise cause the lit indicator to rise. Turning counterclockwise
causes it to fall.
cD
: For compact disc playback with a CD player.
TUNER
: For AM or FM broadcast reception with a tuner.
PHONO
: For record playback with a turntable.
LINE
: Set to this position when listening to a program
from
a component
connected
to the
LINE
terminals.
TAPE 1/DAT : For playback with a cassette deck or digital audio
cassette deck connected
to the TAPE
1/DAT
terminals.
® TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer, etc.)
or cassette deck connected to the TAPE 2 MONITOR terminals.
Off
: Indicator goes out when not in use.
On __ : Indicator lights when using the adaptor component or
listening to the cassette deck.
NOTE:
When no connections are made to the TAPE 2 MONITOR
terminals, or when they are not in use, be sure to set this switch
to the off position. (No sound will be heard if it is set to the on
position.)