Pioneer C-90S Operating Instructions Manual
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer C-90S. Pioneer C-90S 32 pages. Stereo control amplifier
Print Page
SPARE PARTS MASTER
STEREO CONTROL AMPLIFIER
C-90S
The C-90S
is equipped
with the audio/video
program-
mable remote contro! unit. The "S" at the end of the
model number indicates that a programmabie remote con-
trol unit is supplied. The panel itself says C~90.
Operating
Instructions
Thank you for buying this Pioneer product.
Please
read
through
these
operating
instructions
so you
will
know
how
to operate your model properly. After you have fi-
nished reading the instructions, put them away in a safe place for
future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the ex-
planatory
drawings.
However,
the method
of connecting
and
operating the unit is the same.
WARNING:
to prevent FIRE OR SHOCK HAZARD.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian Model]
CAUTION:
ro prevent ELectric sHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenia Les cHocs ELECTRI-
QUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SOR-
TIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE IN-
SEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch.
U.S.,
Canadian,
European,
U.K.,
and
Australian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only.
Never use this model with 110V setting in Saudi
Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements
of the destination.
Check
that it is set properly
before plugging the power cord into the AC outlet. If the voitage
is not properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows.
1. Use a medium-size screwdirver.
2. Insert the screwdriver into the groove on the voltage selector,
and adjust so that the tip of the arrow points to the voltage
value of your area.
—_
Medium-size screwdriver
Sa
3. Set the voltage selector switch for the voltage in your area.
110-120 vi ee
v
e
®) PIONEER'
The future of sound and vision.