Pioneer CT-F10 Operating Instructions Manual - Page 12
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer CT-F10. Pioneer CT-F10 40 pages. Stereo cassette deck
Also for Pioneer CT-F10: Service Manual (28 pages), Supplementary Operating Instructions (21 pages), Servise Manual (28 pages)
Print Page
OPEN/CLOSE
VOLUME
CD
CD-R
AUX
CD
TUNER
SOUND
DIRECT PLAY 3
CD-R
MD
TAPE
TIMER
4
¢
1
¡
CD-R
7
SET
MENU
DISP
STANDBY/ON
SYSTEM
CANCEL
MENU
DISP
CHARA
compartment of the CD player and optional CD-Recorder.
Use to adjust the volume.
Press to switch to CD, tuner, tape,
MD, CD-R or AUX (auxiliary). If the system is in standby, the
power is also switched on. For CD, tape, MD and CD-R,
playback will start if there's a CD/tape/MD loaded.
can't control a component connected to the auxiliary inputs.
Press to select bass, treble, balance or sub-
woofer level (use the
and buttons to adjust the level).
Press to access the timer menu for setting the
wake-up, sleep and record timers.
1 ¡ Press to scan backwards/forwards on the CD/
tape/MD currently playing.
4 ¢
Use to switch between menu options;
adjust the sound; change the preset station number when
listening to the tuner; or skip tracks on the currently playing
CD/tape/MD.
7
Press to stop the currently playing CD/tape/MD.
Press to access the menu for the optional CD-
Recorder.
Press to change the disc information shown in the
optional CD-R's display.
Press to switch the system on or into
standby.
Press to open/close the disc
This system
Press to access the menu.
Press to change the displayed informa-
tion (this varies according to the current function).
Press to make a setting when using the menu system.
Press to escape from within a menu.
CD - RW
SLEEP SYNC
DIGITAL
WAKE-UP
–
Lights when the tuner is tuned to a
broadcast.
– Lights when you're listening to
an FM broadcast in stereo.
– Lights when you're listening to
an FM broadcast in mono.
–
Lights when the tuner is an RDS mode.
– Indicates the repeat mode (RPT for repeat disc;
RPT-1 for repeat track).
– Lights when the sleep timer has been set.
– Lights when the record timer has been set
for the tape deck, MD recorder or CD-Recorder.
– Indicates that the wake-up and/
or the record timer have been set.
– Lights when the wake up timer has been set.
–
Lights during automatic sync recording.
– Lights when the auxiliary input signal is being
attenuated (reduced in level).
– Lights when a playlist has been programmed.
– Indicates the play direction of the tape .
– Lights during random track playback.
RDS
SKIP ON REC
RPT-1
D.VOL
PGM RDM
ATT
TAPE
FINALIZE