Pioneer CT-F10 Operating Instructions Manual - Page 29
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer CT-F10. Pioneer CT-F10 40 pages. Stereo cassette deck
Also for Pioneer CT-F10: Service Manual (28 pages), Supplementary Operating Instructions (21 pages), Servise Manual (28 pages)
Print Page
See page
15
for detailed instructions on loading discs.
If the disc has started playing, press 7.
4
¶ 8
The tape deck goes into record-pause mode, waiting for you to
start the CD.
Recording starts automatically with the CD.
Once the track or disc has finished, the tape deck goes back
into record-pause mode — press 7 to fully stop recording.
Should you want to stop recording before the track/disc has
finished playing, simply press 7 any time during the
recording.
If the recorder has to switch the side of the tape half
way through a track, recording will start again on the other
side from the beginning of the same track. This means you
don't get a single track spread over two sides of a tape.
¢
Usually, when recording a CD or MD, the synchro-recording
feature is the easiest way to do it. However, if you want to
record from the tuner or from a component connected to the
auxiliary inputs, you'll need to start and stop the recording
manually.
DIRECT PLAY 3
TAPE
• Load a cassette
• Set the record direction
• Set the reverse mode
• Switch Dolby NR on/off.
For example, if you want to record from the tuner, press tuner,
and tune into a station.
If you are recording from another component, set it up ready
for playback.
¶ 8
The
tape deck
goes into record-pause mode.
If you're recording from a component that requires you to
start playback (a turntable or another cassette deck, for
example), start playback here.
To pause recording, press ¶ 8. To resume, press
7
.