Pioneer Elite M-10X Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer Elite M-10X. Pioneer Elite M-10X 12 pages. Operating instructions
Also for Pioneer Elite M-10X: Specification Sheet (1 pages), Operating Instructions Manual (36 pages), Service Manual (22 pages)
Print Page
FRONT PANEL FACILITIES
2
STANDBY/ON
POWER
OFF
1
8
En
3
v¿,?m
Î
@
STEREO POWER AMPLIFIER
STANDBY
ON
1
—
Main power (
If the button is OFF (—), the power of the amplifier is shut off and the STANDBY/ON button
on the amplifier does not function.
Pressing the main power button will turn the amplifier ON (_).
2
STANDBY/ON button
Press to switch the amplifier ON or into STANDBY mode.
3
STANDBY indicator
Lights when the amplifier is in STANDBY mode. (Please note that this amplifier consumes
a small amount of power (1 W) during the standby mode.)
4
POWER indicator
Lights when the power is switched on.
NOTE:
The protection function will operate in case of internal amplifier malfunction or in case of
external causes such as static electricity or speaker terminal short circuits. When the protection
function operates, the POWER indicator flashes, and the unit goes out into standby mode.
If this occurs, check the speaker terminals and speaker cords to make sure they are not shorted,
then press the STANDBY/ON button to turn on the unit.
If the protection function then operates again, unplug the power cord and contact a service
center.
REFERENCE STEREO POWER AMPLIFIER
4
_
OFF/
ON ) button