Pioneer GM-3500T Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Amplifier Pioneer GM-3500T. Pioneer GM-3500T 14 pages. Bridgeable two-channel power amplifier
Also for Pioneer GM-3500T: Owner's Manual (37 pages), Owner's Manual (45 pages)

Print Page
Pioneer GM-3500T Owner's Manual
Section
IJ) (
Connecting the units
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire.
•
Do not connect both the RCA input and the
speaker input at the same time.
CD
Car Stereo
@
Speaker output
®
White/black: Left
8
®
White: Left
ffi
®
Gray/black: Right
8
®
Gray: Right
ffi
Q) Speaker input connector
To speaker input terminal of this unit.~
Connecting the power
terminal
The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal (!)and the
ground wire to the car body.
A
wARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1
Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
([)En
of the am pi ifier to the positive ((!)) battery
terminal.
CD
Positive
(ffi)
terminal
@ Engine compartment
®
Vehicle interior
®
Fuse (30 A)
x
2
®
Insert the 0-ring rubber grommet into the
vehicle body.
®
Drill a 14 mm (1/2 in.) hole into the vehicle
body.
2
Twist the battery wire, ground wire
and system remote control wire.
Twist
----·
3
Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
CD
Lug (sold separately)
@ Battery wire
®
Ground wire
4
Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
)