Pioneer GM-4200 Service Manual - Page 11

Browse online or download pdf Service Manual for Amplifier Pioneer GM-4200. Pioneer GM-4200 35 pages. Bridgeable power amplifier
Also for Pioneer GM-4200: Service Manual (36 pages)

Print Page

GIV1-H200

Speaker lead connection procedure

1. Loosen the four screws of the speaker terminals (Speaker Output)

on the rear of the amplifier.

2. Insert the end of each speaker lead between the speaker terminal

and its screw according to the mode to be used, and tighten the

screw.

Terminal screw

Speaker lead terminal

Connection of the battery power, and

ground leads

1. Pass the leads through the band for preventing short circuits.

• This band must be used.

3. Cover each terminal block with a short-circuit prevention band.

• This band must be used.

Short-circuit prevention band

2. Loosen the screws (x 2) of the terminals on the front panel of the

amplifier.

• Remove the screws (x 2) from the two battery power terminals.

Terminal screws

Remove only the screws of the

battery lead terminal. (Loosen

all the other screws.l

3. Connect the battery lead to the two battery lead terminals,

5. Slide the short-circuit prevention band over the terminals,

reinserting and tightening the screws (x 2).

4, Connect the ground lead to the two ground lead terminals,

tightening the screws.

Terminal screws

1 1