Pioneer GM-A3702 Owner's Manual - Page 11
Browse online or download pdf Owner's Manual for Amplifier Pioneer GM-A3702. Pioneer GM-A3702 16 pages. Bridgeable two-channel
Also for Pioneer GM-A3702: Owner's Manual (19 pages), Owner's Manual (33 pages), Owner's Manual (33 pages)
Print Page
Connecting the units
Connecting the speakers
The speaker output mode can be two-channel
(stereo) or one-channel (mono). Connect the
speaker leads to suit the mode according to
the figures shown below.
Two-channel output (Stereo)
1 Speaker (Left)
2 Speaker (Right)
One-channel output
1 Speaker (Mono)
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire.
! Do not connect both the RCA input and the
speaker input at the same time.
1
1 Car Stereo
2
2 Speaker output
3 White/black: Left *
4 White: Left +
5 Gray/black: Right *
6 Gray: Right +
7 Speaker input connector
To speaker input terminal of this unit.
Note
If speaker input wires from a headunit are con-
nected to this amplifier, the amplifier will automa-
tically turn on when the headunit is turned on.
1
When the headunit is turned off, the amplifier
turns off automatically. This function may not
work with some headunits. In such cases, make
sure that the Left channel is connected correctly.
If the function still does not work, please use a
system remote control wire (sold separately). If
multiple amplifiers are to be connected together
synchronously, connect the head unit and all am-
plifiers via the system remote control wire.
En
Autogoods "130"