Pioneer GM-D9601 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Amplifier Pioneer GM-D9601. Pioneer GM-D9601 15 pages. Class d mono amplifier
Also for Pioneer GM-D9601: Owner's Manual (45 pages), Owner's Manual (49 pages)

Print Page

Connecting the units

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied speaker

input wire with RCA pin cord.

1 Car Stereo

2 Speaker output

3 Red: Right +

4 Black: Right *

5 Black: Left *

6 White: Left +

7 Speaker input wire with RCA pin cord

To the RCA input jack of this unit

Notes

! If speaker wires with an RCA pin cord from a

headunit are connected to this amplifier, the

amplifier will automatically turn on when the

headunit is turned on. When the headunit is

turned off, the amplifier turns off automati-

cally. This function may not work with some

headunits. In such cases, please use a sys-

tem remote control wire (sold separately). If

multiple amplifiers are to be connected to-

gether synchronously, connect the head unit

and all amplifiers via the system remote con-

trol wire.

! Connect the system remote control wire when

you wish to only turn on the car stereo, not the

amplifier.

! This amplifier automatically selects an input

signal mode between the RCA level and the

speaker level by detecting an input signal.

Solderless terminal

connections

! Since the wire will become loose over time,

it must be periodically inspected and tigh-

tened as necessary.

! Do not solder or bind the ends of the

twisted wires.

! Fasten while making sure to not to clamp

the insulating sheath of the wire.

! Use the supplied hexagonal wrench to

tighten and loosen the terminal screw of

the amplifier and use it to securely fasten

the wire. Be careful to avoid excessive tigh-

tening of this screw, which may damage

the wire.

Connecting the power terminal

WARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

! Always use the recommended battery and

ground wire, which is sold separately. Con-

nect the battery wire directly to the car bat-

tery positive (+) terminal and the ground

wire to the car body.

! Recommended wires size (AWG: American

Wire Gauge) is as follows. The battery wire,

the ground wire and the optional direct

ground wire must be same size.

! Use a wire of 8 AWG to 16 AWG wire for the

speaker wire.

Battery wire and ground wire size

Wire length

less than 3.6 m (11 ft. 10 in.)

less than 6.4 m (20 ft. 12 in.)

Section

Wire size

6 AWG

4 AWG