Pioneer KEH-P5000 Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for Amplifier Pioneer KEH-P5000. Pioneer KEH-P5000 24 pages. Multi-cd control fm/mw/lw tuner deck amplifier
Also for Pioneer KEH-P5000: Owner's Manual (27 pages), Owner's Manual (48 pages)

Print Page

Parts Identification

Fig. 1

[1] Track number search/Fast forward,

Reverse

[2] Source selector

[6] Multi-play CD player select

[9] Function changeover button

[10] Disc number search

[11] Disc number search/Function button

Function:

@ Display switching/Disc title

ITS (Instant Track Selection)/

Program erase

@ Scan play/Random play

a) Title list

@ Pause

[12] Display

Fig. 4

[20] Function indicator

[29] Manual

[30] Track number

[31] Disc repeat mode display

[32] Disc number

Using the Multi-Play CD Player

1.Press button [2] to change the display to

the multi-play CD player mode and to be-

gin disc play.

Each press of button [2] changes the mode

as follows:

Tuner — Multi-play CD player — OFF

2.Use the Disc Number Search function to

select a disc.

Select the desired disc by pressing one of

the Disc number search button. The num-

ber of the disc selected appears at position

[32] on the display.

¢ If the number at position [32] on the dis-

play does not change when you press a

Disc number serch button, it means that

there is no disc loaded in that tray.

3.Adjust volume and tone (see page 10).

4.To stop disc play, press button [2].

At another press, the normal play resumes

from about where it stopped.

Note:

* It takes about 30 seconds from setting the

magazine in the multi-play CD player till

the start of CD playback. ("READY" ap-

pears on the display.) This does not indi-

cate a problem; it is just for verifying

there a disc in the magazine.

When the multi-play CD player is not

working correctly, an error message ap-

pears on the display (Ex.: "ERROR-80"").

Identify the error from the multi-play CD

player owner's manual.

- After you press a Disc number search but-

ton, it may take some time before play

begins due to the time necessary to load

and set the disc in the mechanism.

Multi-Play CD Player Switching

Up to 4 Multi-play CD player can be con-

nected to this unit. When several multi-play

CD players are connected, you can select

the one you want to play.

Each press of button [6] selects multi-play

CD players 1 to 4. The Multi-play CD player

number appears on the display [27].

Track Number Search

The desired track on the disc currently

being played can be selected by track (or

song) number.

Confirm that Track Number is shown at

Position [30] on the display. If not, press the

button @ of Bank [11].

Press the (P) side of button [1] to increase

the number at Position [30], or the (4) side

to decrease the number. Holding either side

of button [1] changes the track number at

high speed.