Pioneer SX-1700 Operating Instructions Manual - Page 3
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer SX-1700. Pioneer SX-1700 16 pages. Stereo control amplifier
Also for Pioneer SX-1700: Operating Instructions Manual (28 pages), Schematic Diagram (4 pages)
Print Page
SWITCHES (model SX-1700 only)
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage
models
are provided with this switch.
U.S.,
Canadian, European, U.K., and Australian models sre not provided
with this switch.
Main voitages in Saudi Arabia are 127 V and 220 V only, Never use
this model with 110 V setting in Saudi Arabia.
;
The line voltage selector switch is on the rear panel, Before your model
is shipped from the factory, this switch is set to the power requirements
of the destination. Check that it is set properly before plugging the power
cord into the AC outlet. If the voltaae is not properly set or if you move
te an area where the voltage requirements differ, adjust the selector
switch as follows
1. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage selector, and
adjust so that the tip of the groove points to the voltage value of
your area.
—t
1 2204
240V
(}
mov
120-1270
Medium-size screwdriver
|
CHECKING ACCESSORY ITEMS
fi
pe
AM Loop Antenna
FM T-type Antenna
CHANNEL STEP SWITCH
(Multi-voltage model only)
[100kH2z/1 OkHz}position:
Set to this position for areas with an FM reception step of 100kHz, AM
VOkKHz.
[50kHz/9kHz]position:
Set to this position for areas with an FM reception step of 50kHz, AM
QkHz.
NOTE:
When unsure about the channel allocation and de-emphasis values for
your area, consult your dealer for correct information.
CHANNEL STEP
SOkHz-FM-100kHz
SkHz—
AM=— 10kHz
eee
amma!
North and South America
Other countries
3
<ARB1214>