Pioneer VSX-405 Operating Instructions Manual - Page 15
Browse online or download pdf Operating Instructions Manual for Amplifier Pioneer VSX-405. Pioneer VSX-405 29 pages. Audio/video stereo receiver
Also for Pioneer VSX-405: Operating Instructions Manual (28 pages), Service Manual (11 pages), Service Manual (37 pages)
Print Page
FRONT PANEL FACILITIES
® S.BASS indicator
(®) SFC indicator (Not available on the VSX-295
model)
This lights when an SFC mode (STUDIO or SIMULATED
SURROUND)
is selected.
<C) DOLBY PRO LOGIC indicator (Not available on
the VSX-295 model)
(D) TAPE 2 indicator
Lights up when
the input selector
is set to TAPE
2
MONITOR ON.
(© CLASS indicator
Indicates the class selected by the CLASS
button. The
current CLASS is displayed.
') MEMORY
indicator
'G) STEREO/MONO
indicator
STEREO
: Lights up when a stereo FM broadcast is
being received.
MONO
: Lights up when the FM MONO
mode is select
ed with the MPX MODE
button.
(W TUNED indcator
Lights up when a staton is tuned.
() Character display
OPERATING THE TUNER
Press the POWER switch to the ON position.
Select TUNER with the input selector.
Be sure to turn the TAPE 2 MONITOR
button OFF when
listening to AM or FM broadcasts.
Switch ON the SPEAKERS
button corresponding to the
speakers you wish to use.
FM auto stereo reception and monaural reception
Each time you press the MPX MODE button, the MONO
indicator in the display section lights or goes out.
e If an FM stereo broadcast is received when the MONO
indicator is out, the STEREO indicator lights and sound
is in stereo.
e lf an FM stereo broadcast is received when the MONO
indicator is lit, the sound will be monaural.
If there is interference during STEREO
mode recep-
tion, switch to MONO. The sound will become monau-
ral but interference will be reduced.
TUNING INTO STATIONS
Press the TUNING
buttons, and the tuning frequency
changes.
+: Performs tuning from
the currently displayed station
frequency in ascending frequency order.
~: Performs tuning in order of descending frequencies.
1. Use the FM/AM button to select either FM or AM.
2. Press the TUNING
(+,-) buttons
until you reach the
frequency of a desired station.
When a station is received, the TUNED indicator will
light up.
NOTE:
The TUNED indicator may not light with broadcasts received over
long distances, or when the broadcast signals are extremely weak.
3. Adjust the volume and tone controls as desired.
AUTO TUNING (FM only)
Auto tuning is convenient when you do not remember the
frequency of a desired station, or when you wish to find
stations that you do not normally listen to. (Refer to
page 14.)
15
<ARB7065>