Pioneer CDJ-800 Operating Instructions Manual - Page 16

Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CDJ-800. Pioneer CDJ-800 20 pages. Correction
Also for Pioneer CDJ-800: Documentation Update (4 pages)

Print Page

Pioneer CDJ-800 Operating Instructions Manual

1. Connections

ADVANCED OPERATIONS

CUE/LOOP

MEMORY

CUE/LOOP

CALL

QUICK

RETURN

CUE

PLAY/PAUSE

LOOP OUT

(OUT ADJUST)

PLAY/PAUSE

Copying Recorded Data to Another Player

Cue and loop-point data recorded in one player can be copied to another player.

1. Use a mini plug cord to connect the DATA IN/OUT

connectors of two CDJ-800 players (without loaded

CDs).

÷ The supplied control cord can be used.

2. Press the LOOP OUT (OUT ADJUST) button on the

sending player for five seconds or more.

÷ The sending player's LOOP OUT (OUT ADJUST) button will light, and

the [COPY] message will appear in the display, indicating the data trans-

mission mode has been selected.

÷ The BPM display will show the number of discs recorded in the player.

3. Press the LOOP IN/REALTIME CUE button on the

receiving player for five seconds or more.

÷ The receiving player's LOOP IN/REALTIME CUE button will light, and

the [COPY] message will appear in the display, indicating the data recep-

tion mode has been selected.

Cue Point / Loop Point Memory

This component is equipped with an internal memory allowing cue or loop points

to be recorded for each disc. The internal memory allows one cue or loop point to

be recorded for a total of up to 500 discs. If more than 500 cue or loop points are

input, earlier data will be erased, beginning with the most infrequently used data.

7 Storing Cue points

1. Enter Cue points using the A. CUE function or the CUE

button.

2. Press the CUE/LOOP MEMORY button.

÷ [MEMO] is shown in the display indicating that the Cue point has been

stored.

7 Storing Loop points

1. Enter the Loop in/out points to perform loop playback.

2. Press the CUE/LOOP MEMORY button during loop

playback.

÷ [MEMO] is shown in the display indicating that the Loop in/out points

have been stored.

7 Calling stored Cue/Loop points

1. Press the CUE/LOOP CALL button.

÷ The [CALL] indicator will light in the display, the selected Cue/Loop point

will be accessed, and the player will pause at the Cue/Loop in point.

2. Press the PLAY/PAUSE button (6).

÷ Play or loop play starts.

LOOP IN/

REALTIME

CUE

4. Press the PLAY/PAUSE button (6) on the sending

player.

÷ The sending player's PLAY/PAUSE button [6] indicator will flash, and

the contents of the sending player's memory will be transmitted to the

memory of the receiving player (any previous memory contents of the re-

ceiving player will be overwritten).

÷ When the copying is completed, the [End] message will appear in both

players' displays, and the players will return to normal operation mode.

* If the [Err] message appears in one of the displays, the memory

data has not been copied properly. Turn the power to both

players OFF and then ON again, and repeat the copying proce-

dure from step 1.

* If the sending player is disconnected or not connected prop-

erly, the LOOP OUT (OUT ADJUST) button will flash quickly. If

the receiving player is disconnected or not connected prop-

erly, the LOOP IN/REALTIME CUE button will flash rapidly.

* Data on the receiving player is overwritten by the data from

the sending player; this means that any previously existing

data on the receiving player will be completely lost.