Pioneer CDJ-850 Operating Instructions Manual - Page 26
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CDJ-850. Pioneer CDJ-850 32 pages. Cdj-850 owner's manual (french)
Also for Pioneer CDJ-850: Quick Start Manual (3 pages), (French) Manuel Du Propriétaire (32 pages)
![Pioneer CDJ-850 Operating Instructions Manual](/uploads/products/server2/6629735/6629735.jpg)
Additional information
Troubleshooting
!
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble can-
not be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turn-
ing the power off, waiting 1 minute, then turning the power back on.
! Non-finalized (partial discs) CD-R/ -RW cannot be played on the CDJ-850.
! Irregularly shaped discs other than standard 12 cm discs cannot be played on the CDJ-850 (doing so will lead to damage or accidents).
! The BPM measured by the CDJ-850 may differ from the BPM indicated on the disc or that of a Pioneer DJ mixer, etc. This is due to the differ-
ent methods used for measuring the BPM, and is not a malfunction.
Problem
Disc cannot be ejected.
Playback does not start when disc is loaded.
File cannot be played.
No sound is produced, or sound is distorted
or noisy.
Loud noise is produced or playback stops
when a certain disc is played.
File information is not properly displayed.
Track search operation takes too long.
Back cue function does not work.
Loop play function does not work.
Settings are not stored in the memory.
USB device is not recognized.
Cue or loop points of tracks recorded on USB
devices are not stored in the memory.
Cue or loop points of tracks recorded on USB
devices are not displayed.
Time is required to read USB devices (flash
memory drives and hard discs).
The playing address display is not displayed in
the remaining time mode.
26
En
Check
—
Is the disc or file playable?
Is the auto cue function activated?
Is the file copyright-protected (by DRM)?
Are you operating the connected DJ mixer prop-
erly?
Is the CDJ-850 placed near a TV?
Is the disc scratched?
Is the disc dirty?
Is the information recorded in a language not sup-
ported by the CDJ-850?
Is the auto cue function activated?
—
Is a cue point set?
Is a cue point set?
Has the power been turned off directly after
changing the setting?
Is the USB device properly connected?
Is the USB device connected via a USB hub?
Is the USB device supported by the CDJ-850?
Is the file format supported by the CDJ-850?
Are you using a USB device (such as a bus power-
driven hard disk) whose current is higher than this
unit's rated current (500 mA)?
—
Is there sufficient free space on the USB device?
Is the USB device write-protected?
Has the USB device been properly removed?
Is there a large number of folders or files recorded
on the USB device?
Are files other than music files stored on the USB
device?
—
Remedy
If the [DISC EJECT h] button does not work, insert the pin in the
disc force eject pin insertion hole to eject the disc. (page 17)
See About discs on page 7 or Playable music file formats on page 8.
Press [TIME MODE (AUTO CUE)] for at least 1 second to cancel
the auto cue function. (page 21)
Copyright-protected files cannot be played.
Check the operation of the DJ mixer.
Turn the TV's power off, or install the CDJ-850 and TV away from
one another.
Scratched discs may not play.
Wipe the dirt off the disc. (page 28)
When creating files using DJ software, etc., record the informa-
tion in a language supported by the CDJ-850.
Track searching may take some time when there are long silent
sections between tracks.
If track searching is not possible within 10 seconds, a cue point is
set at the beginning of the track.
Set a cue point. (page 20)
Set a cue point. (page 20)
After changing settings, wait at least 10 seconds before turning
the power off.
Connect the device securely (all the way in).
USB hubs cannot be used.
This player only supports USB mass storage class devices.
This player supports portable flash memory and digital audio
playback devices.
Check the file format of the connected USB device. For the file
formats supported by the CDJ-850, see About USB devices on
page 8.
Use a USB device within this unit's rated current (such as a hard
disk driven by an AC adapter or other external power supply).
Turn the power off, wait 1 minute, then turn the power back on.
A maximum of 100 cue and loop points per disc can be recorded
on USB devices (10 per track for media other than discs). If you
attempt to record more points than the limit, [POINT FULL] is
displayed and the points cannot be recorded.
Set the USB device so that files can be written on it.
Set the USB device's write-protect switch to the off position.
Points may not be displayed if the SD memory card/ USB device is
removed without performing the proper stopping procedure or if
the CDJ-850's power is turned off.
When there are many folders or files, some time may be required
for loading.
When files other than music files are stored in folders, time is
required to read them as well. Do not store files or folders other
than music files on the USB device.
When playing files recorded in VBR, it may happen that the set
cannot detect the length of the track immediately and that some
time is required for the playing address display to appear.