Pioneer CDX-M2086X1HWL Service Manual - Page 36
Browse online or download pdf Service Manual for CD Player Pioneer CDX-M2086X1HWL. Pioneer CDX-M2086X1HWL 50 pages.
Print Page
CDX-M2086ZBM
6.3 ADJUSTMENT OF ELEVATION WHEN THE CD CORE UNIT HAS BEEN REMOVED
FOR MAINTENANCE
- Adjustment When Error Code 60 is Displayed Because of Malfunctioning Elevation
•Note :
Unlike the conventional mechanisms, the new mechanism detects the height of the stage using slide-variable
resistance.
To absorb dislocation of the stage height caused by differences in the mechanism and the CD core unit, adjust-
ment must be made for each CD-mechanism module using a variable resistor.
Normally, readjustment is not needed, as this has been adjusted at the factory. However, adjustment of elevation
is required according to the procedure explained below if an elevation error has occurred or if the CD core unit
has been removed.
•Purpose :
To adjust and confirm whether or not elevation operates correctly.
•Adjustment Method :
•Measuring Equlpment: Millivoltmeter
•Measuring Points :
•Setting :
Without a magazine in Test mode
CD CORE
@
UNIT
•Confirmation Procedure
1. Enter Test mode, then select Multi-CD player.
2. Press key 7 to enter Mechanism Test mode.
3. Press key 12 twice to specify the amount of movement.
36
EREF, EPVO
With the mechanism placed upside-down (Place the CD mechanism module so that the
CD core unit is above.)
EPVO
EREF
The amount of movement
changes each time key 12 is
pressed.
maximum movement
Key 12
during movement
Key 12
Key 12
minimum movement
mV meter
Examples of display
TRACK
FUNCTION
'
"
TRACK
FUNCTION
72
00' 00"
TRACK
FUNCTION
72
00' 02"
TRACK
FUNCTION
72
00' 01"
TRACK
FUNCTION
72
00' 00"