Pioneer CLD-900 Operating Instructions Manual - Page 22
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CLD-900. Pioneer CLD-900 36 pages. Compact disc/ laservision player
Also for Pioneer CLD-900: Operating Instructions Manual (36 pages)
Print Page
When operating the remote control unit, point the front part
of the unit at the remote control receiver on the player. The
remote control unit may be used within a range of several
meters from the player. When a command from the remote
control unit is received by the player, the indicator on the
player front panel lights.
NOTE:
- @
Even if the remote control unit is operated within the effective
range, remote control operation may
be impossible if there is any
obstacle between the player and the remote control unit.
©
If the player is operated in the vicinity of other appliances
generating infrared rays, or if other remote control devices using
infrared rays are used near the player, the player may operate im-
properly. Or the reverse, if the player's remote control unit is
operated in the vicinity of other appliances which use an infrared
remote
control device,
the other appliance may operate im-
properly.
¢
When the unit is not to be used for a long period of time (more
than one month), remove the batteries to prevent them from
- leaking inside the compartment. If leakage takes place, wipe up
the liquid inside the compartment and replace the batteries with
new ones.
©
Do not place books or other objects on the remote control unit
since they might depress the buttons and run down the bat-
teries.
REMOTE
COTNROL
OPERATION
FOR
LASERVISION
VIDEO DISC
AUDIO REPRODUCTION
Look at the audio indicator on the player's front panel. When
playback
of a disc is begun,
the audio portion
is also
automatically played. Audio indicators 1/L and 2/R will both
light, indicating that both audio channels are being played
back.
NOTE:
Audio reproduction is only possible in the normal play mode.
When you wish to listen to only one of the audio channels, for
example when playing a disc recorded in two languages, press
either the 1/L or 2/R button, corresponding to the audio chan-
nel to which you wish to listen. The player will switch to the
audio channel corresponding to the button pressed, and the
indicator for the other audio channel will go out.
NOTE:
When only one audio channel is in use, the sound is still fed to both
audio outputs.
When
playing discs recorded with stereo sound, check to
make sure that both the 1/L and 2/R
audio indicators are lit. If
one of the indicators is not lit, press the STEREO button to
turn the indicator for the other channel on.
22
The << SCAN PP, <x3 FAST x3, < MULTI-SPEED >,
~—MULTI-SPEED+,
and
<i STILL/STEPI®
(é@ TRACK
PP!) buttons on the remote
control unit are rocker type
switches, so they will not operate if you press the center of the
buttons.
Please confirm the
audio output channel(s).
AO
MONIT
PR
EXTENDEO
PLAY
l
es
C3
2/R
co
ClVv
=
vor
00>
AUDIO
ad
DIGITAL)
coe 0
PLAY
>
Pause
00
rm
BNALOG
x
ON
OFF | RSHAU
ONCY
eee
When you wish to listen to only
1/L channel.
STEREO
1/L
2/R
When you wish to listen to only
2/R channel.
STEREO
4:
When playing discs with stereo
sound.
STEREO
ey
2'R
serene
REFUR
TSE
SETS
EEE
ES TEES
ESSE
ESE
BT STE
7 EE
SSS
ESS
EEDA
STL
SES
STE
SSS
TS SE
TES
SE
SSE
SES
SSE
SST
SSDS
SP SSS
DE
SEES
ESE
SSS
EASON