Pioneer CMX-5000 Operating Instructions Manual - Page 9

Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CMX-5000. Pioneer CMX-5000 20 pages.

Print Page

Pioneer CMX-5000 Operating Instructions Manual

1. Connections

Tempo control slide:

Moving this dial in the positive (+) direction away from the

center position (normal playback tempo) causes the tempo to

become faster, and moving it in the negative (–) direction

causes the tempo to become slower.

5 Track search button (TRACK SEARCH 4, ¢)

p. 13)

6 Search button (SEARCH 1, ¡)

7 Cue button (CUE) and indicator

Cueing point settings (see p. 13, 16)

Cueing point sampler (see p. 16)

Back cueing (see p. 16)

Cueing point adjust (see p. 16)

8 Play/Pause button (PLAY 3/PAUSE 8) and indica-

tor

(see p. 12)

9 Display

0 Jog dial (+ FWD/– REV)

- Auto mix play button (AUTO MIX PLAY) and indica-

tor

(see p. 17)

Pressing this button causes auto mixing to be turned on or off

each time it is pressed.

= Play mode select button (PLAY MODE SELECT)

p. 17)

This button is used to select the auto mixing play mode and

to specify program settings.

~ Player select button (PLAYER SELECT) and indica-

tor

(see p. 17)

This button is used to select discs when using auto mixing.

! BPM indicator

(see p. 17)

@ NEXT indicator

(see p. 17, 18)

# BPM/NEXT button

(see p. 17, 18)

$ Instant change button (INSTANT CHANGE) and in-

dicator

(see p. 18)

% Short time change button (SHORT TIME) and indi-

cator

(see p. 18)

Pressing this button causes short time changing to be turned

on or off each time it is pressed.

^ BPM/TRACK display (BPM/TRACK)

This display is used to display the track number and BPM

when using auto mixing or preprogrammed program

settings.

& BPM/TRACK dial (BPM/TRACK, PUSH ENTER)

(see p. 17, 18)

This dial is used to switch between different BPM values

when using BPM synchro playback and to select and confirm

track numbers when playing in program mode.

* Press down on the dial after making a selection to confirm

your choice. (Note that this does not include the switching

of BPM settings.)

* BPM synchro button (BPM SYNC)

When BPM SYNC is turned on (i.e., when the BPM SYNC

button is lit), the tempo will be automatically changed so that

the number of beats per minute matches between tracks

mixing into each other. Pressing this button causes the BPM

synchro count feature to be turned on or off each time it is

pressed.

( Mix time control dial (MIX TIME)

This dial is used to specify the mixing time when using the

mix button to perform cross fade mixing.

) Mix mode selection button (MIX MODE SELECT)

and indicator

(see p. 18)

This button is used to select cut-in, zip, echo or cross fade

mixing as the type of mixing to be used when segueing

between tracks.

(see p. 13)

(see p. 14)

(see p. 17)

(see p. 18)

(see

Display

1 Track number display

Displays the track number of the track currently being played.

2 Playback speed display

Tempo control range display (±6, ±10, ±16)

Displays the variable range mode specified using the tempo

(see

control slide.

Tempo change rate display

Displays the rate of change of the tempo as specified using

the tempo control slide.

3 Auto mixing playback player display

The display on the side of the player currently in operation will

flash.

4 Auto cueing indicator (A. CUE)

Lights up when auto cueing is turned on.

5 Playback position display

Used to display a full-scale bar graph for the track being

played to make it possible to get an intuitive feel of the

elapsed and remaining play time.

÷ Display as it appears when displaying elapsed time:

All indicators unlit and then indicators light up in

sequence from left

÷ Display as it appears when displaying remaining time:

All indicators lit and then indicators are turned off in

sequence from left

÷ Display as it appears when there are less than 30 seconds

remaining in a track:

Slow flashing

÷ Display as it appears when there are less than 15 seconds

remaining in a track:

Rapid flashing

6 Track number calendar display

The number corresponding to the track currently being

played is lit. The right-facing arrow is lit for tracks with a track

number of 21 or higher.

Programmed track numbers are lit, and the light for each

number for tracks which have already been played are turned

off once the tracks are played.

7 Time display

Used to display the elapsed playback time (when the remain

indicator is unlit) or the remaining playback time (when the

remain indicator is lit) of the current track in minutes (M),

seconds (S), and frames (F). Note that the amount of time

remaining is displayed by default when the power is first

turned on.

8 BPM display

Used to display the number of BPM for the current track.

Note that depending on the track there may be times when

the BPM counter is unable to count the number of BPM.

9 Looping indicator (LOOP)

Lights up when playing back in loop mode.

0 Relooping indicator (RELOOP)

Lights up when recording a loop.

Read before use (Panel facilities)

TRACK

TEMPO

REMAIN

A.CUE

BPM

17 18 19 20

LOOP

RELOOP