Pioneer CT-M66R Operating Instructions Manual - Page 8

Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CT-M66R. Pioneer CT-M66R 12 pages. Multi-cassette changer

Print Page

PLAYBACK

1. Press the POWER switch (i).

2. Place the cassettes on the tray.

Press the OPEN/CLOSE button 90 and the tray will automatically

slide out. Insert the cassette so that the "A" side is on the left

and the exposed (tape) side is facing down.

The tray can hold up

to 6 cassettes at once

3. Press the OPEN/CLOSE button & to close the tray.

4. Press one of the Cassette Number buttons 09 to load the

cassette for playback.

5. Select the tape transport mode

with the reverse

mode

(REVERSE

MODE} switch (4).

To repeatedly play both sides of the tape, set the switch to the

">" position. During playback of the cassette you wish to hear,

both sides of the tape are played back continuously until 16

sides have been played back.To play only one side of the tape,

set the switch to the " =" position

When set to relay playback, the «a>

(repeat) mode turns into the

two-way { =<)

} mode. After both sides of a cassette are played

back, playback continues on the next cassette.

6. Select

the

Dolby

noise

reduction

systems

with

the

DOLBY NR switch(7).

DOLBY

NR switch to the OFF position. If the tape was recorded

NR switch accordingly to B or C

NOTE:

When loading tapes with different Dolby NR settings, adjust to

the appropriate settings as necessary during playback

7. Start playback by pressing the appropriate play ( or <)

buttons) .

Single side playback (REVERSE

MODE switch:

= }

To play the forward side of the tape (the left side}:

Press the ® button.

To play the reverse side of the tape {the right side):

Press the <4 button.

Double side playback (REVERSE

MODE switch: c> }

Press the ® button to begin playback from the forward side or

press the

button to begin playback from the reverse side.

{f you do not press one of the Cassette Number buttons, then

the lowest numbered cassette will be loaded.

To stop playback

Press the stop (lf) buttonée'.

To temporarily pause playback

Press the pause ( #® ) button {3). To resume playback, press the

pause button again

To fast-forward or rewind the tape

® Perform this operation when the unit is in stop mode. ff the

tape is playing, press the stop (i) button before carrying out

this operation.

When the FWD

tape transport indicator is lit, press the Pe

button to fast-forward the tape toward the end, or press the

+€€ button to rewind the tape toward the beginning

When the REV tape transport indicator is lit.

Press the B® button to rewind the tape toward the beginning,

or press the <4 button to fast-forward the tape toward the

end.

To search for the beginning of a selection

Press the <€€ or BR button during playback (Music Search

—~

on page 16}

cee |

RELAY PLAYBACK

The

order

of playback

will go

from

the lowest

numbered

cassette to the highest numbered cassette if the RELAY

button

48) is pressed during playback, or if the RELAY

button 48) is

pressed in the stop mode and then the Play (B® or @) button 4

is pressed

RANDOM

PLAYBACK

if the RANDOM button 45) is pressed in the stop mode or in the

playback mode, the playback of all cassettes on the tray will be in

a random order. (The RANDOM indicator will light up). The unit

will stop when one side (in the

mode) or both sides (in the

mode) have been fully played back.

NOTE:

if a blank section is played back for approximately

15 seconds,

the blank skip function will come into effect. The tape is auto-

matically forwarded to the beginning of the next selection and

then playback begins.