Ariston AWD 121 User Instructions - Page 6

Browse online or download pdf User Instructions for Washer Ariston AWD 121. Ariston AWD 121 21 pages. Washer / washer-dryer combo
Also for Ariston AWD 121: Repair Manual (20 pages), Instructions For Installation And Use Manual (17 pages)

Print Page

Installation

Whether

new or just

transported

to a new house, installation

is extremely

important

for the correct functioning

of your washer-dryer.

After removing the appliance from its packaging, check that it

is intact.

The inside of the machine is supported,

for

transportation,

by four shipping

bore on the back paneJ.

Before

using

the washer-dryer,

remove the extemaJ ehippin_

remove the spacers together with the

rubber tubes attached to them (save

all the parts) and use the plastic

blanking plugs provided to fill in the

hobs.

Use the wrench provided to

remove the external bolts,

Attach the two rubber hoses provided to the red (hot) and

white (cold) water inlets on the back (top right) or the appliance,

Using the "U'-Connector provided, place the drain hose into

the drain pipe (or the sink,) See Plumbing on Page 7 for more

details,

Leveling

The washer-dryer must be levelled appropriately in order to

guarantee its correct functioning, To level the appliance, the front

feet must be adjusted; the angle of inclination,measured according

to the worktop, must not exceed 2°,

WARNING

Excessive

Weight

Hazard

Use two or more people to move

and install your appliance,

Failure to do so can result in

back or other injury

The tront feet are se/Hoc'k/b.£ & ad/bstab/e

For your own protection,

and to prevent

accidents,

injury

and fire, please

read the following

carefully:

1. Destroy the carton and plastic bags, after the washer-dryer

2. Children should never be left alone or unattended in the

area where appliances are located,

Washer installation

and grounding

must be done in

accordance with local codes by a qualified installer, Installation

instructions

are packed in new washer to the installer's

reference,

4. ONLY Low Sudsing detergent is recommended for this

appliance.

5. The washer must be

plugged into a properly

grounded

8°prong

electrical outlet, For

your safety, the third or

round grounding prong

must

never

removed,

DO NOT USE

EXTENSION CORD.

6. Repair or replace-

ment of a part should

be made only by

service

technician to prevent personal injury or damage to the machine,

7. Disconnect power to the washer at the circuit breaker or

fuse box, or unplug the machine in an emergency when

servicing is required, Have the installer show you and label the

proper switch or fuse at the electrical disconnect box,

Electrical

Requirements

EtectrbaJ Shock Hazard (death, fire or electricaJ shock}_."

1} PJug into a grounded 3 prong outJet.

2) Do not remove ground prong.

3} Do not use an adapter or an extension

cord.

4} The Appliance

shouJd be connected

to an lndividuaJ

Branch Circuit with N. 14 AWG Wire and Protected by 15

A Fuse.

GROUNDING

INSTRUCTIONS

by providing a path of bast resistance for electric current, This

appliance is equipped with a cord

having an equipment°

grounding conductor and grounding plug, The plug must be

plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances,

WARNING - improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Check a qualified

electrician if you are in doubt as to whether the appliance is

properly grounded.

Do not modify the plug provided with the appliance, if it wiii not

fit the outlet, have a proper outlet installed by a qualified

electrician,

lnstrudonsforinstallationanduse

www.aristona

pptia noes.us