Pioneer PD-7500 Operating Instructions Manual - Page 6

Browse online or download pdf Operating Instructions Manual for CD Player Pioneer PD-7500. Pioneer PD-7500 20 pages.

Print Page

CONNECTIONS

Output cable

Power cord

Control cord

CD-DECK

SYNCHRO

cord

Optical fiber cable

®?

Stereo amplifier

CO-DECK

SYNCHRO

CONNECTING THE OUTPUT CABLE:

Connect the plugs on one end of the cable to your amplifier's in-

put terminals (CD or AUX), and those on the other end to the out-

put terminals on this CD player.

When connecting the cord, insert the white plugs into the left

{L) channel, and the red plugs to the right (R) channel.

® Be sure to connect all plugs fully into their terminals.

CONNECTING THE POWER CORD:

CONNECTING THE OPTICAL FIBER CABLE:

NOTE:

Use an optical fiber cable 10 feet (3 m) or less.

® Avoid the optical fiber cable plug being scratched or exposed

to dust. If there is dust, wipe off with a soft cloth.

When an optical fiber cable is not connected, piace the dust cap

on the optical terminal (OPTICAL).

REMOTE CONTROL AMPLIFIER OPERATION:

PD-7500 (U.S., Canadian and Australian models)

PD-6500 (U.S. and Canadian models)

if your amplifier features the BR mark, connect the accessory con-

trol cord between the Amplifier's CONTROL OUT terminal and the

CD player's CONTROL

IN terminal.

® You can then use the remote control unit furnished with your

amplifier to perform PLAY, PAUSE, STOP and TRACK opara

tions on the CD player.

® For details regarding connection and operation, consult the Oper

ating Instructions accompanying your stereo amplifies

® These terminals do not need to be connected if you de nat in

tend to use this function.

NOTE:

®@ When the control cord is connected to the CONTROL IN termi

nal, the remote control unit cannot 6e used to control the play

er directly.

The remote contro! unit must be pointed ai the

amplifier's remote sensor.

®@ Be sure t6 connect both of the contral cord's plugs securely to

the CONTROL IN and CONTROL OUT terminals. Do not connect

only one end of the cable.

When only the digital output is connected,

the remote sensor

of the amplifier does not function.

To operate it, connect the

output cable to the stereo amplifier as well as connecting the

digital output.

About the CD-DECK SYNCHRO

recording

function:

@ This function facilitates edit recording from CD to ca:

when the CD player is connected to a Pioneer cagsett

equipped with a CD-DECK SYNCHRO terminal. For detail

sult the Operating instructions accompanying the ¢

featuring the CD-DECK

SYNCHRO

mark.

@ When only the digital output is connected, the CD-DECK

SYN

CHRO recording does not function. To operate it, connect the

output cable to the stereo amplifier as weil as connecting

the

digital output.