Pioneer PD-M407 Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer PD-M407. Pioneer PD-M407 40 pages. Multi compact disc player
Also for Pioneer PD-M407: Operating Instructions Manual (40 pages), Operating Instructions Manual (28 pages), Servise Manual (32 pages), Service Manual (32 pages)
Print Page
TO PLAY ONLY DESIRED TRACKS/DISCS
1
2
DISC
3
TRACK/MANUAL
41 ¡¢
4
6
PLAY/PAUSE
6
Downloaded From Disc-Player.com Pioneer Manuals
STANDBY/ON
DISC 1
DISC 2
DISC 3
2
DISC 4
DISC 5
DISC 6
6
7
8
3
1
¡
RANDOM
3
4
¢
HI–LITE
PROGRAM
DELETE
1,4
CHECK
CLEAR
'
Î
MULTI
COMPACT DISC PLAYER
REMOTE CONTROL UNIT
(PD-M427 only)
DELETE
(PD-M427 only)
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
DISC 6
(PD-M427 only)
4
¢
DELETE
(PD-M427 only)
3
DELETE PROGRAM PLAYBACK - TO DELETE
UNDESIRED TRACKS/DISCS (PD-M427 only)
1. With the player stopped, press the DELETE button,
so that the DELETE indicator lights.
2. Use the DISC button or one of the DISC NUMBER
(DISC 1 - DISC 6) buttons to select the disc
number.
The selected disc number will be displayed.
3. Then, press the 4 1 or ¡ ¢ button to
select the track number.
The selected track number will be displayed.
4. Press the DELETE button, or wait two seconds;
the track to be deleted will be input.
If the DELETE button is pressed after selecting the disc
number only, the "AL" indicator will appear, indicating
selection of the "Disc All Delete" mode (the entire disc
contents will be deleted from the program memory). While
the "AL" indicator is displayed, however, if the 4 1 or
¡ ¢ button is used to designate a track number and
the DELETE button is then pressed (or after two seconds
elapses), the selected track will be deleted as that program
step.
5. Repeat steps 2, 3 and 4 to delete other tracks.
6. Press the 6 button.
All tracks other than deleted tracks/discs are played in the
order of the discs and track numbers. When tracks have
been played, the player enters stop mode.
NOTE:
When a track is selected with the 4 1 or ¡ ¢ button
in step 3, the displayed track number is automatically
programmed if the 4 1 or ¡ ¢ button is not pressed
within 2 seconds. Therefore, be sure to press the 4 1 or
¡ ¢ button sequentially until the desired track number
appears on the display.
To stop Delete program playback, Press the 7
button.
÷ Track number 33 or above cannot be deleted.
÷ To go to the previous or next disc/track other than the
deleted disc/track, press the 4 1 or ¡ ¢ button.
÷ If the magazine is in the player, the delete program contents
will not be erased even if the power is turned off.
NOTE:
After programming for Program playback or during Program
playback mode, Delete programming can not be carried out.
To clear all of the Delete program contents:
A During stop mode, press the 7 button.
B When the magazine is ejected, the program contents will
be cleared.
C Press the CLEAR button on the remote control unit during
stop mode or play mode. When the CLEAR button is
pressed during Delete program playback mode, the player
enters normal playback mode.
13