Pioneer PDR-509 Operating Instructions Manual - Page 14
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer PDR-509. Pioneer PDR-509 40 pages. Compact disc recorder
Also for Pioneer PDR-509: Service Schematics (23 pages), Service Manual (48 pages), Service Manual (23 pages), Service Manual (14 pages)
Print Page
What's What
30
Display
1
2
q
p
1 RPT / RPT–1 (p.16)
Lights when disc repeat / track repeat mode is on.
2 PGM (p.26)
Lights when program-play mode is active.
3 RDM (p.27)
Lights when random-play mode is active.
4 3 (p.15)
Lights during playback.
5 FADER (p.27, 30)
Blinks during fade in or fade out.
6 8 (p.15)
Lights when the recorder is in either play-pause or
record-pause mode.
7 Message/time display
8 CD / CD–R / CD–RW
Indicates the type of disc currently loaded.
9 FINALIZE (p.33)
Lights if the
-
CD
RW
Also blinks during Automatic Finalization Recording (p.22)
p SYNC (pp.20–22)
Lights when the recorder is in automatic synchro
recording mode.
14
30
23ft. (7m)
5
6
3
4
w
e
currently loaded has been finalized.
Keep in mind the following when using the remote control unit:
Make sure that there are no obstacles in between the remote and
the remote sensor on the unit.
Use within the operating range and angle, as shown in the diagram left.
Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on the unit's remote sensor.
Remote controllers for different devices can interfere with each
other. Avoid using remotes for equipment located near this unit while
using the PDR–509.
Replace the batteries when you notice a fall off in the operating
range of the remote.
7
r
q D.VOL (p.24)
Lights when the digital volume control function is
active.
w AUTO TRACK (p.30)
Lights when automatic track numbering is on during
recording.
e REC (pp.20-23,25,31)
Lights to indicate recording or record-pause mode.
Blinking display indicates record muting.
r Recording level meter (pp.20–25)
Displays the input level during recording, or the
recorded level during playback.
t OVER indicator (p.25)
Indicates that the input signal overloaded the disc
during recording.
y SKIP ON (p.27, 29)
Lights to indicate that a disc contains skip
setting or clearing skip
u ANA (p.25)
Lights when the analog input is selected.
OPT (pp.20–24)
Lights when the optical digital input is selected.
COA (pp.20–24)
Lights when the coaxial digital input is selected.
8
9
y
u
t
s. When
ID
s, the word
blinks.
ID
SKIP