Pioneer CDJ-2000NXS2 Operating Instructions Manual - Page 18
Browse online or download pdf Operating Instructions Manual for DVD Player Pioneer CDJ-2000NXS2. Pioneer CDJ-2000NXS2 43 pages. Multiplayer
Also for Pioneer CDJ-2000NXS2: Operating Instructions Manual (17 pages), Quick Start Manual (4 pages), Connection Manual (7 pages)
Print Page
m BPM
Displays BPM (Beats Per Minute) of the track currently being played.
! The BPM measured by this unit may differ from the BPM indi-
cated on the disc or that of a Pioneer DJ's DJ mixer, etc.This is
due to the different methods used for measuring the BPM, and is
not a malfunction.
n Playing speed adjustment range display
This indicates the range in which the playing speed can be adjusted
with respect to the original playing speed recorded on the medium.
o Loop display
This lights up during loop.
= Setting loops (p. 23 )
p LOOP beat display
Beat count set in the loop is displayed.
q Waveform display
This displays the sound as a waveform.
The overall waveform color can be changed with rekordbox, or
[MENU] or the [SHORTCUT] screen of the unit.
= Changing the color set in a storage device (SD, USB) (p. 34 )
Jog dial display section
1 Operation display
This indicates the playing position, with one revolution equal to 135
frames. It turns during playback and stops in the pause mode.
2 Cue point display/slip play display
3 Audio memory status display
This flashes when the audio memory is being written. It stops flash-
ing, remaining lit, when writing is completed.
It may not be possible to perform the real time cue operation while
the audio memory is being written.
The display also flashes when there is not enough memory due to
scratch play.
4 Jog touch detection display
When the jog mode is set to VINYL, the top of the jog dial lights when
pressed.
5 VINYL
This lights when the jog mode is set to VINYL.
= Operating the jog dial (p. 22 )
18
En
r Playing address display/scale display (1-minute
interval/16-bar interval)
The track is displayed as a bar graph. The current playback posi-
tion is displayed as a white vertical line. When the elapsed time is
displayed, the left edge of the graph lights. When the remaining time
is displayed, the display turns off from the left side. The entire graph
flashes slowly when there are less than 30 seconds remaining in
the track, then begins flashing rapidly when less than 15 seconds
remain.
s Cache meter
This indicates how much of the currently playing track is cached in
the memory.
t Cue/loop/hot cue point display
This displays the position of cue point, loop point and hot cue point
that have been set using the mark.
1
2
3
4
5