Pioneer DV-220KV-K Operating Instructions Manual - Page 18
Browse online or download pdf Operating Instructions Manual for DVD Player Pioneer DV-220KV-K. Pioneer DV-220KV-K 27 pages. Operating instructions
Also for Pioneer DV-220KV-K: Operating Instructions Manual (27 pages)
Print Page
Additional information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other
components and electrical appliances being used. If the trouble cannot be rectified after checking the items
below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
The player may not operate properly due to static electricity or other external influences. In such cases, normal
operation may be restored by unplugging the power cord then plugging it back in.
General problems
Problem
Settings you have made have been
cleared.
Difference in volume between DVDs
and CDs.
Player cannot be operated with the
remote control.
Disc cannot be played or disc tray
opens automatically.
The player's power turns off auto-
matically.
Power turns on or off automatically.
Input of connected TV and AV sys-
tem switches automatically.
Picture is stretched, or aspect ratio
cannot be switched.
18
En
Check
Was the power cord unplugged forcibly
while the player's power was on?
This is not a problem with the player.
Are you operating from far away?
Is the remote control sensor exposed to
direct sunlight or strong artificial light
from a fluorescent bulb, etc.?
Are the batteries dead?
Is the disc scratched?
Is the disc dirty?
Is the disc properly set in the disc tray?
Does the disc have the right region
number?
Is the player placed in a humid loca-
tion?
Is Auto Power Off set to On?
Is KURO LINK set to On?
Is KURO LINK set to On?
Is the aspect ratio properly set on the
connected TV?
Is TV Screen properly set?
Remedy
Be sure to press STANDBY/ ON on the player's
front panel or press STANDBY/ ON on the remote
control and wait for the OFF indicator on the front
panel display to turn off before unplugging the
power cord.
The volume may sound different due to differences
in how the signals are recorded on the disc.
Operate from within a distance of 7 meters from the
remote control sensor.
The remote control signals may not be received
properly if the remote control sensor is exposed
to direct sunlight or strong artificial light from a
fluorescent bulb, etc.
Replace the batteries (page 5).
Scratched discs may not play.
Wipe the dirt off the disc (page 25).
Set the disc with the printed side facing up.
Set the disc within the groove in the disc tray.
See About region numbers on page 16.
There could be condensation inside. Wait a while
for the condensation to evaporate. Do not place the
player near an air-conditioner, etc. (page 24).
If Auto Power Off is set to On, the player's power
turns off automatically if no operation is performed
for over 30 minutes (page 15).
The player's power may turn on together with the
power of the TV connected to the HDMI OUT termi-
nal. If you do not want the player's power to turn on
when the TV's power is turned on, set KURO LINK
to Off (page 15).
The input of the TV and AV system (AV receiver or
amplifier, etc.) connected to the HDMI OUT termi-
nal may automatically switch to the player when
playback starts on the player or the menu screen
(Home Menu, etc.) is displayed. If you do not want
the inputs of the connected TV and AV system (AV
receiver or amplifier, etc.) to switch automatically,
set KURO LINK to Off (page 15).
Refer to the TV's operating instructions and set the
TV's aspect ratio properly.
Set TV Screen properly (page 15).