Pioneer DV-393-S Operating Instructions Manual - Page 23

Browse online or download pdf Operating Instructions Manual for DVD Player Pioneer DV-393-S. Pioneer DV-393-S 48 pages. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Also for Pioneer DV-393-S: Operating Instructions Manual (48 pages), Operating Instructions Manual (48 pages), Operating Instructions Manual (48 pages)

Print Page

Pioneer DV-393-S Operating Instructions Manual

Getting started

FAQ

• After I load a DVD disc, it ejects

automatically after a few seconds!

Most likely, the disc is the wrong region for

your player. The region number should be

printed on the disc; check it against the

region number of the player (which you can

find on the rear panel). See also DVD-Video

regions on page 42.

If the region number is OK, it may be that

the disc is damaged or dirty. Clean the disc

and look for signs of damage. See also

Taking care of your player and discs on

page 40.

• Why won't the disc I loaded play?

First check that you loaded the disc the

right way up (label side up), and that it's

clean and undamaged. See Taking care of

your player and discs on page 40 for

information on cleaning discs.

If a disc loaded correctly won't play, it's

probably an incompatible format or disc

type, such as DVD-Audio or DVD-ROM. See

Disc / content format playback compatibility

on page 8 for more on disc compatibility.

• I have a widescreen TV so why are there

black bars at the top and bottom of the

screen when I play some discs?

Some movie formats are such that even

when played on a widescreen TV, black

bars are necessary at the top and bottom of

the screen. This is not a malfunction.

• I have a standard (4:3) TV and set the player

to show widescreen DVDs in pan & scan

format, so why do I still get black bars top

and bottom with some discs?

Some discs override the display

preferences of the player, so even if you

have 4:3 (Pan & Scan) selected, those

discs will still be shown in letter box format.

This is not a malfunction.

• I've connected to a HDMI compatible

component but I can't get any signal and

the front panel HDMI indicator won't light!

Make sure that you've selected this player

as the HDMI input in the settings for the

component you're using. You may need to

refer to the instruction manual of the

component to do this. See Connecting

using HDMI (DV-490V only) on page 14 for