Pioneer DV-505 Service Manual - Page 18
Browse online or download pdf Service Manual for DVD Player Pioneer DV-505. Pioneer DV-505 47 pages. Dvd/video cd/cd player code switchable modification
Also for Pioneer DV-505: Instruction And Installation Manual (16 pages)
Print Page
DV-505, DVL-909, DV-S9
• Description of Each Item on the Display
(1) Address indication
The address being traced is displayed in number.
DVD
: ID indication (hexadecimal number, 8 digits)
CD/LD (CLV) : A-TIME (min. sec.)
LD (CAV)
: FRAME
(Note : For DVDs, decimal-number indication is possible.)
(2) Code indication of the remote control unit [R-
The code for the key pressed on the remote control unit, which is
received by the FL controller, is displayed while the key is pressed.
In the case of the double code, the second code will be displayed.
(3) Key code indication for the main unit [K- ]
The code for the key pressed on the main unit, which is received by
the system controller, is displayed while the key is pressed.
(4) Tilt error value, Tilt servo status [TILT- :
Tilt error value :
Tilt servo status :
Tilt neutral
Tilt servo on
Tilt servo off
(5) Tracking status [TRKG-
Tracking on
Tracking off
(6) Spindle status [SPDL-
Spindle accelerator and brake
FG servo
Rough, velocity phase servo
Offset addition, rough, velocity phase servo
(7) Mechanism position value [M- ]
Position code
(8) Slider position [S-
CD TOC area
CD active area
CDV video area
LD active area
Side B inside
(9) AGC setting [AGC- ]
AGC on
AGC off
(10) Output video system [V-
NTSC system
PAL system
Auto-setting
18
[
[
[
]
[0] to [F]
[N]
[ON]
[OFF]
]
[ON]
[OFF]
]
[A/B]
[FG]
[SRV]
[O_S]
[0] to [8]
]
[IN ]
[CD ]
[CDV ]
[LD ]
[B IN]
[ON]
[OFF]
]
[NTSC]
[PAL ]
[AUTO]
(11) FTS servo IC information
Indications for the following two types of information can be
switched:
DSP coefficient indication
Displays the address (four digits) of the specified coefficient
and the setting value (four digits) with [TEST] and [9] keys.
]
]
Jitter value indication
]
Displays the jitter value (four digits) with [TEST] and [DIG/
ANA] keys.
]
(12) Error rate indication
C1 error value of CD
C1 error value of DVD
(13) Internal operation mode of mechanism controller
[MM- : ]
Internal mechanism mode (2 digits) and internal mechanism step (2
digits) of the mechanism controller
Note : For details, see the specifications of the mechanism controller.
(14) Disk sensing [DSC-
The type of discs loaded is displayed.
[DVD], [CD ], [CDV], [LD ], [VCD], [ ]
(15) Pickup [PU-
The pickup being operating is displayed.
DVD
CLD
(16) Destination setting of the FL controller
[F:
/
]
Three characters in front represent the type of model:
505: DV-505, S9: DV-S9
606 : DV-606D, EDU: for education
909: DVL-909, K88: DVL-K88.
Three characters that follow represent the destination code.
J : /J, K: /KU, /KC, /KU/KC, RAM: /RAM (China)
RL : /RL, WY: /WY, RD: /RD.
Furthermore DVL-91/KU/CA indicates as L91/K.
(17) Region setting of the player [REG: ]
Setting value [1] to [6]
(18) Version of the flash ROM [V: . ]
(19) Revision of the system controller [S: .
Revision number of the external ROM part (flash ROM) of the
system controller
Revision of the internal ROM part of the system controller
[KS-[
[JT-[
[ER-C1
[ER-
]
]
]
]
]
]
]
]
[DVD]
[CLD]
/ . ]
<Front>
<Rear>