Pioneer PRV-LX1 Software Manual - Page 9

Browse online or download pdf Software Manual for DVD Player Pioneer PRV-LX1. Pioneer PRV-LX1 24 pages. Dvd-video recorder
Also for Pioneer PRV-LX1: Product Information Bulletin (5 pages), Quick Start (5 pages), Supplementary Manual (1 pages), Command Protocol Manual (20 pages), Protocol Manual (14 pages), Edit Decision List (6 pages), Maintenance (5 pages), Product Information Bulletin (6 pages), Operating Instructions Manual (38 pages), Update Manual (2 pages), System Update (10 pages), System Update (10 pages), Training Manual (38 pages), Manual (38 pages)

Print Page

4) Remove all shapes and fill colors from the Thumbnail Mask layer except for the black

shapes representing thumbnails.

5) Select all of the thumbnail shapes.

6) Fill the thumbnail shapes with white (RGB: 255,255,255).

7) Fill the remainder of the layer with black (RGB: 0,0,0).

The stacking order from top to bottom should now be Thumbnail Mask, Thumbnail

Area, Button Mask, Button Image, Button Area, Highlight Area and Background.

In the sample menu file, the thumbnail shapes correspond to the star-like button shapes.

However, thumbnail shapes do not have to mirror the button shapes. Below are two possible

custom designs with similar button shapes (star-shaped buttons below are shaded gray only for

easier differentiation in this manual).

Block thumbnails over

9.0

EXT

REA

AYER

Although text is entered through the PRV-LX1 Function menu, the Text Area layer dictates

where text appears on the menu and sets the access order. The colors correspond to the color

order defined for button and thumbnail areas. Refer back section 4.2 Color Order Chart for

additional information.

This layer works in conjunction with the PRV-LX1's pre-set fonts. To adjust the font sizes and/or

colors, wait to make the changes through the PRV-LX1 DVD Menu Maker. When your custom

menu includes using the larger fonts available from the PRV-LX1 library or longer title/button

labels, verify that your text boxes are sized appropriately. If the disc title text and button labels

are part of the Background layer, the Text Area layer must still be part of the .PSD file imported

in to the PRV-LX1. Fill the entire layer with white (RGB: 255,255,255) if it is not to be used.

Follow the steps below to create the Text Area layer.

With the Button Image layer selected and all other layers OFF, click on Layer from

the main menu bar.

Select New from the drop-down Layer menu.

star-shaped buttons

Circular thumbnails within

star-shaped buttons

Page 9 of 24

PRV-LX1 DVD Menu Maker