Pioneer PRV-LX1 Manual - Page 6

Browse online or download pdf Manual for DVD Player Pioneer PRV-LX1. Pioneer PRV-LX1 38 pages. Dvd-video recorder
Also for Pioneer PRV-LX1: Product Information Bulletin (5 pages), Quick Start (5 pages), Supplementary Manual (1 pages), Command Protocol Manual (20 pages), Protocol Manual (14 pages), Edit Decision List (6 pages), Software Manual (24 pages), Maintenance (5 pages), Product Information Bulletin (6 pages), Operating Instructions Manual (38 pages), Update Manual (2 pages), System Update (10 pages), System Update (10 pages), Training Manual (38 pages)

Print Page

Block Diagram Overview

All inputs Video and Audio (Composite, Component Beta or SMPTE,

S-Video, DV, Balanced and Unbalanced Audio) enter and pass

though the JKIB assembly and enter the AVIB assembly. If using the

composite input in through mode the unprocessed audio and video

pass back directly to the JKOB output assembly for monitor viewing.

Video and Audio signals entering the AVIB assembly are subject to

analog to digital conversion, time based correction and digital noise

reduction will be added if selected by the user. On this assembly the

signals next are MPEG encoded and sent out to the PCIB assembly.

The two main functions of the PCIB assembly are.

1. RS422 control interface.

2. PCI interface for the MPEG encoded signals.

Output signals from this board enter the PC Mother board (PCI slot 3)

The DECB assembly receives its input from the PC Mother board

(PCI slot 2) into its PCI interface conversion IC. After conversion back

to a MPEG stream the signals pass through the MPEG decoder and

digital to analog converters for both audio and video. At this point the

analog video and audio output to the JKIB assembly.

The JKOB or jack panel output board receives input audio and video

signals from the JKIB assembly. In turn it outputs directly to the back

panel.

All manuals and user guides at all-guides.com

(JKIB Assembly)

(AVIB)

(PCIB)

(DECB)

(JKOB)