Pioneer PDP-S50 Operating Instructions Manual - Page 2
Browse online or download pdf Operating Instructions Manual for Speaker System Pioneer PDP-S50. Pioneer PDP-S50 15 pages.
Also for Pioneer PDP-S50: Service Manual (7 pages)
Print Page
English
Thank you for buying this Pioneer product.
Please read through these operating instructions before
using your speaker system so you will know how to make
the most of its performance. After you have finished
reading the instructions, put them away in a safe place for
future reference.
WARNING:
Handling the power cord on this product or
cords associated with accessories sold with the product
will expose you to lead, a chemical known to the State
of California and other governmental entities to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
CAUTION
About compatibility
This product is designed exclusively for use with the
Pioneer Plasma Display. For more information on
compatibility, please consult with your nearest Pioneer
authorized dealer or service center.
About installation and setting
÷ Attach the Plasma Display to the stand before installing
the speakers. See the Operating Instructions packed
together with the stand for how to assemble the stand.
÷ Do not lift up the display by the speakers. A speaker
may come off, so carry the display by holding it by the
bottom and its handle.
÷ When installing the speaker, do not use any screws
other than those supplied, otherwise the speaker may
come off from the main unit and fall over.
÷ When installing the speaker, tighten the screws firmly.
÷ Please handle the speaker with sufficient care, as the
grille net and the cabinet can become damaged or
broken when they are subjected to strong external
impacts.
÷ Placing a CRT computer screen or CRT monitor near to
the speaker may result in interference or color
distortion. If this happens, distance the monitor from
the speaker.
About the input
÷ In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
÷ Do not use the speaker with anything other than the
specified Pioneer Plasma Display. Doing so may result
in damage or fire.
÷ Be sure to turn the connected devices off and remove
the power cord from the wall outlet beforehand when
changing the connection or installation method.
÷ When using a tone control function to greatly
emphasize treble sounds, do not use excessive
amplifier volume.
Installation
÷ Consult your dealer if you encounter any difficulties
with this installation.
÷ Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
2
CHECKING THE ACCESSORIES
7 Speaker Cable × 2
7 Speakers Mounting Screw (M5 × 10 mm: Black) × 16
7 Speaker Mounting Bracket
For LEFT-BOTTOM
For RIGHT-BOTTOM
7 Padding Strip × 2
(For Flush mounting)
When speakers are mounted Flush, they are affixed to
the side of the speaker as a buffer.
7 Operating Instructions × 1
There are two ways to mount these speakers,
either Air mount or Flush mount.
7 Air mount
There is a gap of air of about 15 mm between the
speakers and the display.
Speakers
7 Flush mount
The speakers are direct against the display.
Speakers
For LEFT-TOP
For RIGHT-TOP