Pioneer PDP-S60 Operating Instructions Manual - Page 6

Browse online or download pdf Operating Instructions Manual for Speaker System Pioneer PDP-S60. Pioneer PDP-S60 45 pages.

Print Page

English

10. Bundling the cables.

Speed clamps and bead band are included with the

plasma television for tidying your cables and keeping

extra cable length out of the way.

Attaching speed clamps to the plasma television

Attach the speed clamps using the holes marked with

below, depending on your routing system.

Attaching and removing speed clamps

Insert [1] into an appropriate hole on the rear of the

plasma television and snap [2] into the back of [1] to

lock the clamp.

• Speed clamps are designed to be difficult to undo

once in place. Please attach them carefully.

• Use pliers to twist the clamp 90°, pulling outward.

The clamp may deteriorate over time and become

damaged if removed.

• Be careful not to subject any connecting cables to

strain.

NOTE:

• Use the bead bands and speed clamps as

necessary.

• When tidying up your speaker cables, make sure to

bundle them so that they are not subjected to any

pressure.

Speaker Cable

∞ Rear of Display

Speed Clamp

Bead Band

Speed Clamp

Bead Band

NOTE:

First lay the plasma television on top of a soft sheet etc.,

then attach the speakers.

1. Attach the speakers to the plasma

television (See procedures 1 to 10 on

pages 3 to 6).

2. Place the plasma television on the

mounting fittings of the hung on

wall unit.

For details, refer to the operating instructions supplied

with the hung on wall unit.

Caution

Do not lift up the display by the speakers. A speakers

may come off, so hold it by the bottom and top.