Pioneer SBX-300 Operating Instructions Manual - Page 9
Browse online or download pdf Operating Instructions Manual for Speaker System Pioneer SBX-300. Pioneer SBX-300 28 pages. Speaker bar system
Print Page
Chapter 2
Installing and
Connecting the Unit
Before connecting the unit or changing the
connections, be sure to turn off the power and
disconnect the power cord from the outlet.
Also, make sure you have finished connecting
all cables before connecting the power cord to
the wall outlet.
Installing the Unit
Installing the unit in front of a
TV
1 Install the unit away from the TV so
that the rear of the unit does not scratch
the TV.
Caution
• Do not install the unit in an unstable place such
as on an unsteady stand or tilted surface. The unit
may fall or tip over, resulting in injury.
• The unit is not magnetically shielded and so should
be used away from a cathode ray tube (CRT) TV
or monitor. Also, do not place devices that are
easily influenced by magnetism (magnetic cards,
watches, video tapes, etc.) near the unit.
Installing and Connecting the Unit
Note
• When the unit interferes with the stand or
other parts of the TV.
– Attach the height adjustment feet and adjust
the height.
• When the TV remote control does not work
well.
– Install the unit away from the TV.
– Use the IR repeater function (page 16).
Attach the height adjustment feet
• If the unit interferes with the stand or other
parts of the TV, you can adjust the height of
the unit.
• Match each of the left sides and right sides
of the unit and height adjustment feet and
then secure the height adjustment feet with
the supplied screws.
Cautions on attaching the height
adjustment feet
• To prevent suffocation caused by accidental
swallowing or an injury or other accident, be sure
to carry out the work in a place that is out of the
reach of infants and young children.
• To prevent damage to the product, choose a level
place and carry out the work on a soft surface such
as a carpet while taking care not to over tighten the
mounting screws.
L
L
Mounting the unit to a wall
You can use the wall mounting fittings on the
rear of the unit to mount the unit to a wall.
Cautions on mounting
The unit is heavy so there is a risk that its
weight could cause the screws to work loose or
the wall material to fail to support it, resulting
in the unit falling. Make sure that the wall you
intend to mount the unit to is strong enough to
support it. Do not mount the unit to a plywood
or soft surface wall.
Mounting screws are not supplied. Use screws
suitable for the wall material and capable of
supporting the weight of the unit.
9
En
R
R