Pioneer TAD-R1/XTW/E5 Service Manual - Page 4

Browse online or download pdf Service Manual for Speaker System Pioneer TAD-R1/XTW/E5. Pioneer TAD-R1/XTW/E5 17 pages.

Print Page

2.3 CABLE CONNECTION AND LOCATION OF THE TERMINALS OF THE

SPEAKER UNIT

Terminal Assy

Red

Network Assy (MPF)

Network Assy (LPF)

LPF

Packing /SEC2109

Rear panel of the cabinet

Tools to be used:

• Hexagonal wrench, Size 2 mm (for connection of the connecting cables to the Terminal Assy)

• Hexagonal wrench, Size 4 mm (for the fixing screws of the Terminal Assy)

• Phillips screwdriver (for connection of the connecting cables between the terminals of the speaker unit and the Network Assy)

• Box wrench, Size 7 mm, for M4 nuts (for the nuts attaching the Network Assy)

• Packing SEC2109 (for replacement of the connection cables or the Network Assy for the woofers)

Note: The figures below are the views from inside the cabinet (from the rear of the speakers).

Connection cord (TW)

Network Assy (HPF)

Network Assy (LPF)

(30)

130

Red (TW)

Black (WF)

Green (MID)

150

Connection cord (MID)

Notes on assembling the Terminal Assy

(When replacing the connection cables or the Network

Assy for the woofers)

1. Pass the cables through the holes on the rear panel of the

cabinet and wind the packing at the designated places

(see the figure at left). Adjust for the thickness of the

packing, and cut off the unnecessary remaining packing

material. As this packing cannot be reused, procure it in

advance.

2. Connect the cables of the Network Assy then push the

cables back into the cabinet so that the holes are properly

filled with the packing.

TAD-R1

Red

CST Unit

Woofer Unit