Pioneer Elite PRO-R06U Training Manual - Page 32
Browse online or download pdf Training Manual for Monitor Pioneer Elite PRO-R06U. Pioneer Elite PRO-R06U 47 pages. Pioneer 6th generation plasma media receivers
Print Page
2.3. COMMON ADJ
Exclusively used for technical analsyis (details omitted).
2.4. PANEL FACT.
Please refer to panel's service manual.
2.5. OPTION
Operation item
No.
1
PEAK LIMITTER
2
EDID WRITE MODE
3
ANTENNA MODE
3. ANTENNA MODE
Receiving Cable/Air signal with equipped/unequipped DTB tuner.
When DTV tuner is equipped
It is effective during tuner function only (others are gray-downed). The currently viewed
ANT A/ANT B function's cable/air (both analog and digital) signal are changed. The channel
settings are memorized (memorized by DTV side).
When DTV tuner is unequipped
It is possible for ANT A/ANT B function to receive air/cable signal.
Channel settings are not memorized. But after leaving factory mode, the settings are maintained.
If the air/ cable signal is changed, the reserved allocation map is written.
For example, if the signal is changed to air, then the air's broadcast map is configured,
and cable's broadcast map is destroyed.
If the signal is changed to cable, then the cable's broadcast map is configured, and air's
broadcast map is destroyed.
OSD display
CABLE
AIR
Function/Display
Control Peak Limitter Select ON/OFF
DISABLE
CABLE
Funcrion
Change the antenna setting to cable
Change the antenna setting to air (analog)
32
Content
ENABLE
AIR
Control device
RS232C
PLT
EDW