Pioneer PDP 433CMX Operating Instructions Manual - Page 36
Browse online or download pdf Operating Instructions Manual for Monitor Pioneer PDP 433CMX. Pioneer PDP 433CMX 44 pages. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Also for Pioneer PDP 433CMX: Quick Reference Parts Lists (12 pages)
Print Page
Other Operations
4
Press SET to select INPUT 1.
The factory default setting is OFF. Each time SET is
pressed the selector function switches alternately as
shown:
3 OFF
INPUT1 2
÷ When OFF is selected, AUTO FUNCTION is
disabled.
÷ When INPUT 1 is selected, the display input
automatically switches to INPUT 1 when a signal is
detected at the INPUT 1 jack. Thereafter, the input
will not change even if the INPUT button is pressed
on the remote control unit or display.
Once the function has switched to INPUT 1 by
operation of the AUTO FUNCTION facility, if the
input signal is no longer detected at the INPUT 1
jack, the function will automatically switch back to
the original input source used before the AUTO
FUNCTION facility was enabled.
5
Following completion of settings, press MENU
again to return the display to its normal screen.
Note
The AUTO FUNCTION for INPUT1 is supported only when a
separate SYNC or composite SYNC analog RGB signal is input.
(When a G on SYNC or component video signal is input, AUTO
FUNCTION is disabled.)
Audio Output (AUDIO OUT)
The signal level produced at the AUDIO OUT jack can be
set to FIXED or VARIABLE (linked to the VOLUME) as
desired.
1
Press MENU.
The onscreen menu will be displayed.
MAIN MENU
PICTURE
SCREEN
:
CO NT RA S T
:
BR
I GHT .
: 6
+
R L E V E L
.
: 6 0
G L E V E L
.
+
: 6 0
+
B L E V E L
.
:
H E NH AN CE
.
:
V E NH AN CE
.
R S E T
E
SELECT
SET
30
En
INPUT1
SET UP
OPTION
0
0
0
0
0
ENTER
EXIT
MENU
2
Press 2/3 to select OPTION.
MAIN MENU
PICTURE
SCREEN
POWE R
A U T O
A UD I O O
SELECT
SET
3
Press 5/∞ to select AUDIO OUT.
MAIN MENU
PICTURE
SCREEN
POWE R
A U T O
A UD I O O
SELECT
SET
4
Press SET to select the desired audio level setting.
The factory default setting is FIXED. Each time SET is
pressed, the function alternates as shown:
3 FIXED
VARIABLE 2
÷ When FIXED is selected, the audio output volume
will not change, even if the setting of the display's
VOLUME function is later changed.
÷ When VARIABLE is selected, the level of the output
signal changes in accordance with the setting of the
VOLUME function.
5
Following completion of settings, press MENU to
return to normal screen display.
Note
The AUDIO OUT setting affects all input sources.
INPUT1
SET UP
OPTION
C O
N
T
R
O
L
:
S T A
ND
A RD
:
F
U
N
C T
I O
N
OF F
:
U
T
F I
X D
E
CHANGE
EXIT
MENU
INPUT1
SET UP
OPTION
:
C O
N
T
R
O
L
S T A
ND
A RD
:
F
U
N
C T
I O
N
OF F
:
U
T
F I
X D
E
CHANGE
EXIT
MENU