3Com Etherlink 3C905B-TX Quick Manual - Page 8
Browse online or download pdf Quick Manual for Network Card 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 15 pages. Etherlink pci network interface cards
Also for 3Com Etherlink 3C905B-TX: Quick Manual (12 pages), Quick Manual (12 pages)
Print Page
rn_body.SML Page 6 Wednesday, June 9, 1999 7:56 AM
6
E
L
®
PCI N
THER
INK
7 Secure the NIC with the screw you removed in
If you want to connect the Remote Wake-Up cable, see
"Connecting the Remote Wake-Up Cable" in the user guide
to continue the installation. If you do not want to connect
the cable, continue with
8 Replace the PC cover and plug in the power cord.
Do not turn on the power to the PC.
The next step is to connect the NIC to the network.
Connecting the NIC to the Network
Connect the appropriate network cable to the port on the
NIC, following the specifications in the table below.
Network
Port
Environment
RJ-45
100 Mbps
(100BASE-TX)
10 Mbps
(10BASE-T)
AUI
10 Mbps
(10BASE5)
BNC
10 Mbps
(10BASE2)
SC
100 Mbps
(100BASE-FX)
ST
10 Mbps
(10BASE-FL)
For detailed instructions, see the user guide.
The next step is to install the network driver.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
I
C
Q
G
ETWORK
NTERFACE
ARDS
UICK
step
8.
Cable Required
Category 5 unshielded
twisted-pair
Category 3, 4, or 5
unshielded twisted-pair
10BASE5 thick Ethernet
coaxial (10 Mbps only)
10BASE2 thin Ethernet coaxial
(10 Mbps only)
Long-wavelength fiber-optic
(1300 nm): 50 µ/125 µ or
62.5 µ/125 µ multimode fiber
Short-wavelength fiber-optic
(850 nm): 50 µ/125 µ or
62.5 µ/125 µ multimode fiber
UIDE
step
5.
Maximum
Cable Length
100 m (328 ft)
100 m (328 ft)
500 m (1,640 ft)
185 m (607 ft)
Full-duplex: 2,000 m
(6,560 ft )
Half-duplex: 412 m
(1,351 ft)
Full-duplex: 2,000 m
(6,560 ft )
Half-duplex: 412 m
(1,351 ft)