Aeotec Dual Nano Switch ZW132 User Manual - Page 2

Browse online or download pdf User Manual for Switch Aeotec Dual Nano Switch ZW132. Aeotec Dual Nano Switch ZW132 15 pages.

Print Page

8-7-2019

Notes for the wire connection ports:

N – Power input for neutral

L – Power input for live

IN – Input for load power supply

OUT1 – Output for load 1

OUT2 – Output for load 2

S1 – External switch control for load 1

S2 – External switch control for load 2

Important safety information.

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The

manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other

materials.

The maximum amperage rating for Dual Nano Switch should not exceed 5 amps per load.

Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure.

Install the Dual Nano Switch.

Dual Nano Switch installs behind a lighting switch or a momentary push button. It works with only 3-wire (with neutral) lighting setups, though each installation of Dual Nano

Switch is accordingly slightly different:

1. Shut off the main circuit breaker of your home for safety during the installation and ensure the wires are not short circuited during the installation which will cause damage to

the Dual Nano Switch.

Note: Your home's main circuit breaker must support the overload protection for safety.

https://aeotec.freshdesk.com/support/solutions/articles/6000178928-dual-nano-switch-user-guide-zw132-and-zw140-

Dual Nano Switch user guide : Aeotec Group

2/15