Aeotec Smart Switch 6 User Manual - Page 8

Browse online or download pdf User Manual for Switch Aeotec Smart Switch 6. Aeotec Smart Switch 6 12 pages.
Also for Aeotec Smart Switch 6: Manual (7 pages)

Print Page

1. Take your Minimote to your Smart Switch.

2. Press the Remove Button on your Minimote.

3. Press the Action Button on your Smart Switch.

4. If your Smart Switch has been successfully removed from your network, its RGB

LED will remain the colourful gradient status. If the removal was unsuccessful, the

RGB LED will still be solid (Energy mode state when the output is on or Night

light mode state when the output load is off), repeat the instructions from step 2.

5. Press any button on your Minimote to take it out of removal mode.

Advanced functions.

Changing LED mode.

You can change the mode of how the LED acts through configuring Smart Switch.

There are 3 different modes: Energy mode, Momentary indicate mode, and Night

Light mode.