Ariston CLAS NET One User Manual - Page 4

Browse online or download pdf User Manual for Boiler Ariston CLAS NET One. Ariston CLAS NET One 12 pages. Condensing wall-hung gas boiler

Print Page

USER'S MANUAL

The installation and first ignition of the

boiler must be performed by qualified Gas

Safe Registered engineer in compliance with

Gas Safety (instillation & use) regulations

and all other national regulations regarding

installation, and in conformity with any

requirements established by local authorities

and public health organisations.

After the boiler has been installed, the installer

must ensure that the end user receives the

declaration of conformity and the operating

manual, and should provide all necessary

information as to how the boiler and the safety

devices should be handled.

This appliance is designed to produce hot water for domestic

use (combi version).

It should be connected to a heating system and a distribution

network for domestic hot water, both of which must be compatible

with its performance and power levels.

The use of the appliance for purposes other than those

specified is strictly forbidden. The manufacturer cannot be held

responsible for any damage caused by improper, incorrect and

unreasonable use of the appliance or by the failure to comply

with the instructions given in this manual.

Installation, maintenance and all other interventions must be

carried out in full conformity with the governing legal regulations

and the instructions provided by the manufacturer. Incorrect

installation can harm persons, animals and possessions; the

manufacturing company shall not be held responsible for any

damage caused as a result.

In the event of any maintenance or other structural work in the

immediate vicinity of the ducts or flue gas exhaust devices and

their accessories, switch the appliance off by switching the

external bipolar switch to the "OFF" position and shutting off the

gas valve.

When the work has been completed, ask a qualified technician

to check the efficiency of the ducting and the devices.

If the boiler should be out of use for a prolonged period, it is

recommended that the electrical power supply be disconnected

and that the external gas cock be closed. If low temperatures are

expected, the boiler and system pipe work should be drained in

order to prevent frost damage.

Turn the boiler off and turn the external switch "OFF" to clean

the exterior parts of the appliance.

Do not allow children or inexperienced persons to use the

appliance without supervision.

CE labelling

The CE mark guarantees that the appliance conforms to the

following directives:

- 2009/142/CEE

relating to gas appliances

2014/30/EU

relating to electromagnetic compatibility

- 92/42/CEE

relating to energy efficiency

2014/35/EU

relating to electrical safety

- 2009/125/CE

Energy related Products

- 813/2013

Commission regulation (EU)

Do not forget the Log Book!

The Benchmark Scheme

Benchmark

places

responsibilities

manufacturers and installers.

The purpose is to ensure that customers are

provided with the correct equipment for their

needs, that it is installed, commissioned and

serviced in accordance with the manufacturer's

instructions by competent persons and that it

meets the requirements of the appropriate Building

Regulations.

The Benchmark Checklist can be used to

demonstrate compliance with Building Regulations

and should be provided to the customer for future

reference.

Installers are required to carry out installation,

commissioning and servicing work in accordance

with the Benchmark Code of Practice which is

available from the Heating and Hotwater Industry

Council who manage and promote the Scheme.

www.centralheating.co.uk

Visit

information.

both

for more