3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface Card Quick Manual - Page 6
Browse online or download pdf Quick Manual for Network Card 3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface Card. 3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface Card 12 pages. Fast etherlink xl pci 10/100base-tx network interface card
Print Page
4
F
E
AST
THER
Connecting to the Network
You must connect the NIC to the network before installing
the network driver. To connect the 3C905B-TX NIC to the
network cable, follow these steps:
1 Connect the network cable to the RJ-45 port on the
3C905B-TX NIC, as shown in Figure 3.
Figure 3 Connecting the Network Cable to the RJ-45 Port
2 Connect the other end of the network cable to a
10BASE-T or a 100BASE-TX network hub or switch.
If the appropriate LNK LED does not light, there is no
connection between the NIC and the network. Go to
Chapter 4 in the user guide for troubleshooting information.
The next step is to load the network driver that allows your
PC or server to connect to the network. Go to the
appropriate section to install the network driver.
L
XL PCI 10/100BASE-TX NIC Q
INK
T X
D a t a
A C T
L
1 0
N
K
1 0 0
LEDs
G
UICK
UIDE
RJ-45 port
RJ-45
connector